Panasonic AW-PH360N manual FCC Note

Page 3

FCC Note:

This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications.

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Replace battery with part No. CR2032 only.

Use of another battery may present a risk of fire or explosion.

Caution—Battery may explode if mistreated.

Do not recharge, disassemble or dispose of in fire.

1 indicates safety information.

- 3 -

Image 3
Contents AW-PH360N Indicates safety information FCC Note Contents AccessoriesIntroduction Installation precautions Precautions for use Parts and their functions Tilting arm Suspended installation Stand-alone installation $ Assembling the pan/tilt headOAttaching the tilting arm For a precise landing For suspended installationFor stand-alone installation For a soft landingConnector printed circuit board $ Transmission signal selection settingOAnalog/IEEE1394 card settings Oweb card settings Osdi settings$ Setting the cable compensation circuit of video signals When using the AW-RP605A controllerWhen using the AW-RP400 controller $ Installing the pan/tilt head $ Mounting the camera Suspended installationMounting example when the lens side is heavy Mounting example when the camera side is heavyOAttaching the chain With the AW-E350/AW-E650With the AW-E655/AW-E750/AW-E860 OAdjusting slack in the chain OMounting a cameraWith the AW-E350/AW-E650 With the AW-E655/AW-E750/AW-E860 Connections Monitor Connections Compensation unit Zoom lens RS-232C cable AW-CA28T9 $ Connecting the connector panel RS-232C controlAs viewed from cable end $ Head connector panelConnector Pb OUT connector DC 12V in terminal board $ Connecting the AC adapter for use with the pan/tilt head10BASE-T $ Connection examplesAW-PS300A AC adapter AW-PS300A Equivalent to UTP Category 5 straight Cable, max ft 10 m Equivalent to Belden AW-RP605A Coaxial cable Camera cable supplied Panel is used to control the camera Coaxial cable Belden 8281, max ft m Color monitor AW-RC400 Connections Personal computer Belden 8281, max AW-CA50F29 AW-CA50E29 Limiters OFor the controller AW-RP301/AW-RP305/AW-RP501/AW-RP505 $ Setting/releasing the limitersOFor the controller AW-RP605A OFor the controller AW-RP400 $ Replacing the gear Replacement of consumable parts$ Replacing the battery $ Replacing the motorSpecifications $ Functions/performance Page Page Panasonic Broadcast & Television Systems Company