Panasonic AW-PH360N manual Limiters

Page 43

Limiters

Be absolutely sure to set the limiters (travel range) of the pan/tilt head before use. Depending on where the pan/tilt head system has been installed, obstacles may be present within the travel range with which the camera may come into contact. Contact with any such obstacle by the camera may cause malfunctioning or accidents.

In this case, contact can be prevented by setting the limiters directly before any such obstacle.

The controller is used to set the limiters.

The positions of four limiters — namely, the upper, lower, left-most and right-most limits of the travel range — can be set.

Once they have been set, the positions will not be lost even after the power has been turned off.

- 43 -

Image 43
Contents AW-PH360N Indicates safety information FCC Note Accessories ContentsIntroduction Installation precautions Precautions for use Parts and their functions Tilting arm $ Assembling the pan/tilt head Suspended installation Stand-alone installationOAttaching the tilting arm For a precise landing For suspended installationFor stand-alone installation For a soft landingConnector printed circuit board $ Transmission signal selection settingOAnalog/IEEE1394 card settings Oweb card settings Osdi settingsWhen using the AW-RP605A controller $ Setting the cable compensation circuit of video signalsWhen using the AW-RP400 controller $ Installing the pan/tilt head $ Mounting the camera Suspended installationMounting example when the lens side is heavy Mounting example when the camera side is heavyWith the AW-E350/AW-E650 OAttaching the chainWith the AW-E655/AW-E750/AW-E860 OMounting a camera OAdjusting slack in the chainWith the AW-E350/AW-E650 With the AW-E655/AW-E750/AW-E860 Connections Monitor Connections Compensation unit Zoom lens RS-232C cable AW-CA28T9 $ Connecting the connector panel RS-232C controlAs viewed from cable end $ Head connector panelConnector Pb OUT connector DC 12V in terminal board $ Connecting the AC adapter for use with the pan/tilt head10BASE-T $ Connection examplesAW-PS300A AC adapter AW-PS300A Equivalent to UTP Category 5 straight Cable, max ft 10 m Equivalent to Belden AW-RP605A Coaxial cable Camera cable supplied Panel is used to control the camera Coaxial cable Belden 8281, max ft m Color monitor AW-RC400 Connections Personal computer Belden 8281, max AW-CA50F29 AW-CA50E29 Limiters OFor the controller AW-RP301/AW-RP305/AW-RP501/AW-RP505 $ Setting/releasing the limitersOFor the controller AW-RP605A OFor the controller AW-RP400 $ Replacing the gear Replacement of consumable parts$ Replacing the battery $ Replacing the motorSpecifications $ Functions/performance Page Page Panasonic Broadcast & Television Systems Company