Panasonic WV-NP1000, WV-NP1004 About SD memory card, Information about SD memory card, Format

Page 22

Configure the settings relating to SD memory card [SD memory card]

Click the [SD memory card] tab on the "Basic setup" page. (page 19)

The settings relating to the SD memory card can be configured on this page.

[About SD memory card]

Select "Use" or "Not use" to determine whether or not to use the SD memory card.

Important:

Before removing the SD memory card from the cam- era, it is necessary to select "Not use" first.

After inserting the SD memory card, it is necessary to select "Use" to use the SD memory card.

[Information about SD memory card]

Available size and the total size of the SD memory card will be displayed.

Depending on the state of the SD memory card, the size indications will differ as follows.

Indication

Description

----------KB/----------

KB The SD card memory is not

 

inserted, or failed to obtain

 

available size due to an error,

 

etc.

 

 

Note:

When the available size reached "0 KB", images will not be saved on the SD memory card. It is recom- mended to check the available size of the SD card memory periodically.

[Format]

To format the SD memory card, click the [Execute] but- ton.

Important:

Before formatting the SD memory card, it is neces- sary to select "Use" for "About SD memory card" on the [SD memory card] tab of the "Basic setup" page and "OFF" for "FTP periodic transmission" on the [FTP] tab of the "Network setup" page.

Format the SD memory card only by clicking the [Execute] button on the setup menu. Otherwise, the following functions using the SD memory card may not work properly with this camera.

Save/obtain images when failed to transmit to the FTP server using the FTP periodic transmis- sion function

Save/obtain the system logs

It is recommended to use Panasonic's SD memory card. Otherwise, the camera may not work properly or performance deterioration may be caused.

It is impossible to access the SD memory card in the process of formatting.

All data saved on the SD memory card will be delet- ed when the SD memory card is formatted.

Do not turn the power of the camera off in the process of formatting.

After formatting the SD memory card, available size may be smaller than the total size since the default directory is automatically created in the SD memory card

22

Image 22
Contents WV-NP1004 Contents About these operating instructions PrefaceTrademarks and registered trademarks Monitor images from a single camera Monitoring Images on a PCStep About the Live One shot button 3Main areaAvailable operations when live images are displayed Operation DescriptionImages will be automatically switched between colour and B/W Monitor images from multiple cameras Notify of alarm occurrences by e-mail Action at an Alarm OccurrenceTransmit an image onto a server automatically Transmit Images onto an FTP Server Obtain images on the SD memory card Save images on the SD memory cardAbout SD memory card Use FTP About the Network Security of the Camera Access restrictions by changing the Http portEquipped security functions How to display the setup menu How to operate the setup menu About the operation window Help button Network setup buttonMaintenance button 1Status display area Configure the basic settings of the camera Basic setup Configure the basic settings BasicDefault OFF Link/Access LED Daylight saving SummertimeConfigure the settings relating to the NTP server NTP Indication Description About SD memory cardInformation about SD memory card FormatDefault 5 fps Configure the settings relating to Jpeg image JPEG/MPEG-4Image capture size/Scan mode Image qualityConfigure the settings relating to MPEG-4 image JPEG/MPEG-4 About the operation panel Configure the settings relating to audio Audio Number of characters for the IP address 1 Configures the multi-screen settings Multi-screen setupIP Address Number of characters for the camera title 0Configure the alarm settings Alarm setup Configure the settings relating to the alarm action AlarmDirectory Alarm image FTP transmissionDefault blank Transmission interval Number of characters for the directory nameDefault Open Default OFF External terminal output setupDefault Latch Alarm output Pulse widthDefault None Default Middle StepSet the VMD areas VMD area Delete the set VMD area Number of characters for the mail subject 0 Default OFF AddressMail notification Mail bodyAvailable port number 1 Default Retry times Panasonic alarm protocolDefault OFF Destination port Available retry times 1 Default IP addressDefault blank Password Retype password User authenticationDefault OFF User name Number of characters for the password 4 32 charHost authentication Configure the settings of the servers Server setup Configure the settings relating to the mail server MailDefault Passive FTP server address Configure the settings relating to the FTP server FTPFTP mode Number of characters for the FTP server addressConfigure the network settings Network Configuring the network settings Network setupDhcp DNS Ddns Configure the settings relating to Ddns DdnsDefault OFF Host name Number of characters for the host name 1 64 charCamera location Configure the settings relating to Snmp SnmpAccess interval Number of characters for the camera location 0Default blank Interval Default OFF DirectoryDefault blank File name FTP periodic transmissionHow to configure the schedule settings How to delete the set schedule Check the system log System log Maintenance of the camera MaintenanceError message Time & dateUpgrade the firmware Upgrade How to upgrade the firmwareInitialize/restart the camera Initialization Initialize setup dataInitialize setup data and Html data Initialize Html dataALC/ELC Configure the settings relating to the camera operationsCamera ID ShutterSync AGCSens UP White BALPrivacy Zone BW ModeDNR EL-ZOOMABF Configure the settings relating to the flange-back BackMANUAL-ADJ SETUP-SW Lock ABF AutoConfigure the settings on the Special Setup Netmask Configure the network settings NetworkIP Addr GatewayCamera title can be edited and displayed on the screen Configure the detailed settingsAbout character entry To cancel the mask setting Default OFF StepCompensate backlight Adjust white balance finely Default 30 sec Step Configure the B/W mode settingsDefault High Step Default onSet the privacy zone Adjust the electronic zoom Correct image defects blemishes such as scratches About the Displayed System Log Error indications relating to SmtpError indications relating to FTP Category Cause DescriptionError indications relating to NTP Error indications relating to DdnsOther error Troubleshooting Symptom Cause/solutionSymptom Symptom Cause/solution Reference Pages Solutions Reference Pages Osaka, Japan N1205-0 3TR004271AAA
Related manuals
Manual 3 pages 60.95 Kb