Panasonic WV-NP1000, WV-NP1004 manual Daylight saving Summertime, Default OFF Link/Access LED

Page 20

[Daylight saving (Summertime)]

Select "ON" or "OFF" to determine whether or not to apply daylight saving time.

ON: Applies summer time. An asterisk (*) will be dis- played on the left side of the displayed time and date.

OFF: Does not apply summer time.

Default: OFF

[Link/Access LED]

Select "ON" or "OFF" to determine whether or not to light the link LED, the access LED of the network con- nector, and the SD memory card error LED.

Select "ON" to check the network status by lighting the LEDs. Select "OFF" to turn off the LEDs at all times. Default: ON

Note:

Link LED: When "ON" is selected, this LED will light when communication with the connected device is available.

Access LED: When "ON" is selected, this LED will light when accessing to a network.

SD memory card error LED: This LED will light when it is impossible to write data on the SD memory card.

20

Image 20
Contents WV-NP1004 Contents Trademarks and registered trademarks PrefaceAbout these operating instructions Step Monitoring Images on a PCMonitor images from a single camera About the Live One shot button 3Main areaAvailable operations when live images are displayed Operation DescriptionImages will be automatically switched between colour and B/W Monitor images from multiple cameras Transmit an image onto a server automatically Action at an Alarm OccurrenceNotify of alarm occurrences by e-mail Transmit Images onto an FTP Server About SD memory card Use Save images on the SD memory cardObtain images on the SD memory card FTP Equipped security functions Access restrictions by changing the Http portAbout the Network Security of the Camera How to display the setup menu How to operate the setup menu About the operation window Network setup button Maintenance buttonHelp button 1Status display areaConfigure the basic settings of the camera Basic setup Configure the basic settings BasicDefault OFF Link/Access LED Daylight saving SummertimeConfigure the settings relating to the NTP server NTP About SD memory card Information about SD memory cardIndication Description FormatConfigure the settings relating to Jpeg image JPEG/MPEG-4 Image capture size/Scan modeDefault 5 fps Image qualityConfigure the settings relating to MPEG-4 image JPEG/MPEG-4 About the operation panel Configure the settings relating to audio Audio Configures the multi-screen settings Multi-screen setup IP AddressNumber of characters for the IP address 1 Number of characters for the camera title 0Configure the alarm settings Alarm setup Configure the settings relating to the alarm action AlarmAlarm image FTP transmission Default blank Transmission intervalDirectory Number of characters for the directory nameDefault OFF External terminal output setup Default Latch Alarm outputDefault Open Pulse widthSet the VMD areas VMD area Default Middle StepDefault None Delete the set VMD area Default OFF Address Mail notificationNumber of characters for the mail subject 0 Mail bodyPanasonic alarm protocol Default OFF Destination portAvailable port number 1 Default Retry times Available retry times 1 Default IP addressUser authentication Default OFF User nameDefault blank Password Retype password Number of characters for the password 4 32 charHost authentication Configure the settings of the servers Server setup Configure the settings relating to the mail server MailConfigure the settings relating to the FTP server FTP FTP modeDefault Passive FTP server address Number of characters for the FTP server addressDhcp Configuring the network settings Network setupConfigure the network settings Network DNS Configure the settings relating to Ddns Ddns Default OFF Host nameDdns Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp Access intervalCamera location Number of characters for the camera location 0Default OFF Directory Default blank File nameDefault blank Interval FTP periodic transmissionHow to configure the schedule settings How to delete the set schedule Maintenance of the camera Maintenance Error messageCheck the system log System log Time & dateUpgrade the firmware Upgrade How to upgrade the firmwareInitialize setup data Initialize setup data and Html dataInitialize/restart the camera Initialization Initialize Html dataConfigure the settings relating to the camera operations Camera IDALC/ELC ShutterAGC Sens UPSync White BALBW Mode DNRPrivacy Zone EL-ZOOMMANUAL-ADJ Configure the settings relating to the flange-back BackABF SETUP-SW Lock ABF AutoConfigure the settings on the Special Setup Configure the network settings Network IP AddrNetmask GatewayAbout character entry Configure the detailed settingsCamera title can be edited and displayed on the screen Compensate backlight Default OFF StepTo cancel the mask setting Adjust white balance finely Configure the B/W mode settings Default High StepDefault 30 sec Step Default onSet the privacy zone Adjust the electronic zoom Correct image defects blemishes such as scratches Error indications relating to Smtp Error indications relating to FTPAbout the Displayed System Log Category Cause DescriptionOther error Error indications relating to DdnsError indications relating to NTP Troubleshooting Symptom Cause/solutionSymptom Symptom Cause/solution Reference Pages Solutions Reference Pages Osaka, Japan N1205-0 3TR004271AAA
Related manuals
Manual 3 pages 60.95 Kb