Configure the basic settings of the camera [Basic setup]
The basic settings such as time and date and camera name, and the settings relating to the NTP server and the SD memory card can be configured on the "Basic setup" page.
The "Basic setup" page has 3 tabs of the [Basic] tab, the [NTP] tab and the [SD memory card] tab.
Configure the basic settings [Basic]
Click the [Basic] tab on the "Basic setup" page.
The settings such as the camera name, time and date, etc. can be configured on this page.
[Initial display image type]
Select "JPEG" or
[Camera title]
Enter the name of the camera. Click the [SET] button after entering the name of the camera. The entered name will be displayed in the status display area. Number of characters for the camera name: 0 - 20
characters
Default:
[Time and date setup]
Enter the current time and date. When
Available range: 01/01/2005 0:00:00 – 12/31/2035 23:59:59
Default: 01/01/2005 0:00:00
Important:
Enter the current hour reflecting the selected time display format.
[Time display]
Select
Default: 24-hours
[Date/time display format]
Select a date/time display format.
When "01/04/2005 13:10:00" is set for "Time and date setup" after selecting
MM/DD/YYYY: 04/01/2005 13:10
DD/Mmm/YYYY: 01/Apr/2005 13:10
YYYY/MM/DD: 2005/04/01 13:10
Mmm/DD/YYYY: Apr/01/2005 13:10
Default: MM/DD/YYYY
[Display position]
Determine whether or not to display the shooting date and time, and the position of the date and time to be displayed.
OFF: No shooting date and time is displayed.
ON (Upper left): The shooting date and time will be dis- played at the upper left corner of the image display area.
ON (Lower left): The shooting date and time will be dis- played at the lower left corner of the image display area.
ON (Upper right): The shooting date and time will be displayed at the upper right corner of the image dis- play area.
ON (Lower right): The shooting date and time will be displayed at the lower right corner of the image dis- play area.
Default: OFF
19