Notes:
•The port forwarding function changes a global IP address to a private IP address, and "Static IP masquerade" and "Network Address Translation (NAT)" have this function. This function is to be set in a router.
•To access the camera via the Internet by connecting the camera to a broadband router, it is necessary to assign a respective port number for each camera and address translation by using the port forwarding function. For fur- ther information, refer to the operating instructions of the broadband router in use.
Enter [Global IP address + : |
|
(colon) + port number] in the | Global address |
"Address" box of the browser | |
via the Internet. | for the WAN |
vvv.xxx.yyy.zzz:82 | vvv.xxx.yyy.zzz |
vvv.xxx.yyy.zzz:81 |
|
Internet
(WAN)
Cable modem xDSL modem
Broadband router | Private address |
| |
| for the LAN |
| 192.168.0.254 |
Address translation using the port forwarding function vvv.xxx.yyy.zzz:82 → 192.168.0.2:82
Private address 192.168.0.2 Port number: 82
Address translation using the port forwarding function vvv.xxx.yyy.zzz:81 → 192.168.0.1:81
Private address 192.168.0.1 Port number: 81
Configure the settings relating to DDNS [DDNS]
Click the [DDNS] tab on the "Network setup" page. (☞ page 39) The settings relating to DDNS can be configured on this page.
When using the DDNS function, it is possible to access with "Host name registered in the DDNS server.nmdns.net". To use the DDNS function, it is necessary to connect to the dedicated DDNS server. Refer to the web site for further information about the DDNS. Refer to the "Readme" file about the web site.
It is necessary to configure the host name, user name and password registered in the DDNS server.
[DDNS]
Select "ON" or "OFF" to determine whether or not to use the DDNS function.
Default: OFF
[Host name]
Enter the host name to be used.
Number of characters for the host name: 1 - 64 char-
acters
[User name]
Enter the user name (login name) to access the DDNS server.
Number of characters for the user name: 1 - 32 char-
acters
41