Panasonic WV-NP1000 manual Error indications relating to Ddns, Error indications relating to NTP

Page 64

Error indications relating to DDNS

Category

Cause

Description

Connection error

Cannot connect to DDNS server.

The designated IP address of the DDNS may be incorrect. Check if the DDNS set- tings are configured correctly.

The DDNS server may be down. Ask the network administrator.

User name and password isn't correct.

Entered user name or password may be incorrect. Check if the DDNS settings are configured correctly.

 

IP address updated failed.

IP address update error occurred in the

 

 

DDNS server. Ask the network administrator.

 

 

 

Internal error

Other error

An error occurred in the DDNS function.

 

 

Check if the DDNS settings are configured

 

 

correctly.

 

 

 

Error indications relating to NTP

Category

Cause

Description

Connection error

Cannot connect to NTP server.

The IP address of the server may be incorrect. Check if the IP address of the server is configured correctly.

The NTP server may be down. Ask the network administrator.

Internal error

Other error

• The designated IP address of the NTP

 

 

server may be incorrect. Check if the NTP

 

 

server settings are configured correctly.

 

 

• The NTP server may be down. Ask the

 

 

network administrator.

 

 

 

Other error

Category

Cause

Description

Time adjustment

Succeeded in the update. (NTP)

Time correction succeeded.

synchronizing with NTP

 

 

succeeded.

 

 

 

 

 

64

Image 64
Contents WV-NP1004 Contents About these operating instructions PrefaceTrademarks and registered trademarks Monitor images from a single camera Monitoring Images on a PCStep About the Live One shot button 3Main areaAvailable operations when live images are displayed Operation DescriptionImages will be automatically switched between colour and B/W Monitor images from multiple cameras Notify of alarm occurrences by e-mail Action at an Alarm OccurrenceTransmit an image onto a server automatically Transmit Images onto an FTP Server Obtain images on the SD memory card Save images on the SD memory cardAbout SD memory card Use FTP About the Network Security of the Camera Access restrictions by changing the Http portEquipped security functions How to display the setup menu How to operate the setup menu About the operation window Network setup button Maintenance buttonHelp button 1Status display areaConfigure the basic settings of the camera Basic setup Configure the basic settings BasicDefault OFF Link/Access LED Daylight saving SummertimeConfigure the settings relating to the NTP server NTP About SD memory card Information about SD memory cardIndication Description FormatConfigure the settings relating to Jpeg image JPEG/MPEG-4 Image capture size/Scan modeDefault 5 fps Image qualityConfigure the settings relating to MPEG-4 image JPEG/MPEG-4 About the operation panel Configure the settings relating to audio Audio Configures the multi-screen settings Multi-screen setup IP AddressNumber of characters for the IP address 1 Number of characters for the camera title 0Configure the alarm settings Alarm setup Configure the settings relating to the alarm action AlarmAlarm image FTP transmission Default blank Transmission intervalDirectory Number of characters for the directory nameDefault OFF External terminal output setup Default Latch Alarm outputDefault Open Pulse widthDefault None Default Middle StepSet the VMD areas VMD area Delete the set VMD area Default OFF Address Mail notificationNumber of characters for the mail subject 0 Mail bodyPanasonic alarm protocol Default OFF Destination portAvailable port number 1 Default Retry times Available retry times 1 Default IP addressUser authentication Default OFF User nameDefault blank Password Retype password Number of characters for the password 4 32 charHost authentication Configure the settings of the servers Server setup Configure the settings relating to the mail server MailConfigure the settings relating to the FTP server FTP FTP modeDefault Passive FTP server address Number of characters for the FTP server addressConfigure the network settings Network Configuring the network settings Network setupDhcp DNS Configure the settings relating to Ddns Ddns Default OFF Host nameDdns Number of characters for the host name 1 64 charConfigure the settings relating to Snmp Snmp Access intervalCamera location Number of characters for the camera location 0Default OFF Directory Default blank File nameDefault blank Interval FTP periodic transmissionHow to configure the schedule settings How to delete the set schedule Maintenance of the camera Maintenance Error messageCheck the system log System log Time & dateUpgrade the firmware Upgrade How to upgrade the firmwareInitialize setup data Initialize setup data and Html dataInitialize/restart the camera Initialization Initialize Html dataConfigure the settings relating to the camera operations Camera IDALC/ELC ShutterAGC Sens UPSync White BALBW Mode DNRPrivacy Zone EL-ZOOMABF Configure the settings relating to the flange-back BackMANUAL-ADJ SETUP-SW Lock ABF AutoConfigure the settings on the Special Setup Configure the network settings Network IP AddrNetmask GatewayCamera title can be edited and displayed on the screen Configure the detailed settingsAbout character entry To cancel the mask setting Default OFF StepCompensate backlight Adjust white balance finely Configure the B/W mode settings Default High StepDefault 30 sec Step Default onSet the privacy zone Adjust the electronic zoom Correct image defects blemishes such as scratches Error indications relating to Smtp Error indications relating to FTPAbout the Displayed System Log Category Cause DescriptionError indications relating to NTP Error indications relating to DdnsOther error Troubleshooting Symptom Cause/solutionSymptom Symptom Cause/solution Reference Pages Solutions Reference Pages Osaka, Japan N1205-0 3TR004271AAA
Related manuals
Manual 3 pages 60.95 Kb