Configure the settings relating to audio [Audio]
Click the [Audio] tab on the "Camera setup" page. (☞ page 23)
The settings relating to audio can be configured on this page.
[Authentication]
Select an access level for audio transmission from the following. Refer to page 35 for further information about the access level.
Level 1 only/Level 2 or higher/All users Default: All users
Note:
Images and audio will not be synchronized.
[Mic mode*]
Select "ON" or "OFF" to determine whether to turn on or off audio on a PC.
ON: Transmits audio from the camera to the PC. Audio can be heard with images on the PC. Images and audio will not be synchronized.
OFF: Does not transmit audio from the camera to the PC. Therefore, no settings and controls relating audio will be invalidated.
Default: ON
[Audio bit rate]
Select "16 kbps" or "32 kbps" for audio bit rate.
Default: 32 kbps
[Audio sensitivity]
Select the sensitivity of the
High/Middle/Low
Default: Middle
[Transmission interval]
Select an interval for audio transmission from the follow- ings.
20 msec/40 msec/80 msec/160 msec Default: 40 msec
26