Panasonic WV-NP1000, WV-NP1004 manual Agc, Sens UP, Sync, White BAL

Page 50

The following are available for the shutter speed.

When "Full scan" is selected for resolution:

OFF (1/12.5), 1/25, 1/50, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000

When "Partial scan" is selected for resolution:

OFF (1/50), 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000

Default: 1/25

Notes:

When "ALC+" or "ELC" is selected for "ALC/ELC", shutter speed selection is unavailable. The "---" indi- cation will be displayed for the shutter speed.

When a fast shutter speed is selected, sensitivity will become lower and smear may appear under a bright light source.

[AGC]

Select a method of gain adjustment from the following. ON (HIGH)/ON (MID)/ON (LOW): When illuminance of subject becomes darker, gain will be automatically

incremented and screen will become brighter. "HIGH", "MID" and "LOW" are indications of gain level.

OFF: Gain will not be incremented.

Default: ON (HIGH)

[SENS UP]

Adjust the sensitivity.

When using the sensitivity-up function, image will become brighter by amplified light intensity. When "FIX" is selected, amplification rate will be fixed. When "AUTO" is selected, amplification rate will change auto- matically according to illuminance of subject.

The following are available for the sensitivity-up. OFF/X2 AUTO/X4 AUTO/X6 AUTO/X10 AUTO*/OFF/ X2 FIX/X4 FIX/X6 FIX/X10 FIX*/X16 FIX*/X32 FIX*

*Available only when "Partial scan" is selected for reso- lution.

Default: OFF

Notes:

When "1/30" is selected for "SHUTTER" (when "Full scan" is selected for resolution), "1/100" is selected for "SHUTTER" (when "Partial scan" is selected for resolution), or "ALC+" or "ELC" is selected for "ALC/ELC", only "AUTO" parameters are available. When selecting any of "1/25" - "1/120" for "SHUT- TER", select a parameter for "SENS UP" after set- ting a parameter for "SHUTTER".

When the sensitivity (amplification rate) is incre- mented, images on the screen may become noisy, may be washed out, or stripes may appear. This is not malfunction.

When selecting a parameter except "OFF", "X2

AUTO" and "X2 FIX", select "FIX" or "PRESET" of "C/L ←→ B/W" or "MANUAL-ADJ" for the "BACK- FOCUS" setting. "ABF" and "AUTO" of "C/L ←→

B/W" are unavailable.

[SYNC]

2 types of synchronization method are applicable with this camera and one of them will be displayed.

(1)Multiplexed vertical drive (VD2)

(2)Internal sync (INT)

When multiplexed vertical drive signal (VD2) is input, synchronization method will automatically shift to "VD2".

[WHITE BAL]

Select a method of white balance adjustment from the following.

ATW1: Auto tracking white balance. The camera will constantly check colour temperature of light source and adjust white balance automatically. Manual adjustment is available for fine adjustment even after white balance is set automatically. (page 58) Operating colour temperature range is approx.

2 700 K – 6 000 K. Under the following conditions, colour may not be faithfully processed.

When shooting a subject of which major part is thick colour

When shooting blue sky or sun at sunset

When shooting a subject whose illuminance is too low

ATW2: Auto tracking white balance under a sodium lamp. The camera will adjust white balance automat- ically under a sodium lamp.

Operating colour temperature range is approx.

2 000 K – 6 000 K.

AWC: Auto white balance control suitable when shoot- ing where light source is fixed and light intensity is constant. Operating colour temperature range is approx. 2 000 K – 10 000 K. When selecting "AWC", adjust white balance as follows.

Default: ATW1

50

Image 50
Contents WV-NP1004 Contents Trademarks and registered trademarks PrefaceAbout these operating instructions Step Monitoring Images on a PCMonitor images from a single camera About the Live One shot button 3Main areaAvailable operations when live images are displayed Operation DescriptionImages will be automatically switched between colour and B/W Monitor images from multiple cameras Transmit an image onto a server automatically Action at an Alarm OccurrenceNotify of alarm occurrences by e-mail Transmit Images onto an FTP Server About SD memory card Use Save images on the SD memory cardObtain images on the SD memory card FTP Equipped security functions Access restrictions by changing the Http portAbout the Network Security of the Camera How to display the setup menu How to operate the setup menu About the operation window Help button Network setup buttonMaintenance button 1Status display areaConfigure the basic settings of the camera Basic setup Configure the basic settings BasicDefault OFF Link/Access LED Daylight saving SummertimeConfigure the settings relating to the NTP server NTP Indication Description About SD memory cardInformation about SD memory card FormatDefault 5 fps Configure the settings relating to Jpeg image JPEG/MPEG-4Image capture size/Scan mode Image qualityConfigure the settings relating to MPEG-4 image JPEG/MPEG-4 About the operation panel Configure the settings relating to audio Audio Number of characters for the IP address 1 Configures the multi-screen settings Multi-screen setupIP Address Number of characters for the camera title 0Configure the alarm settings Alarm setup Configure the settings relating to the alarm action AlarmDirectory Alarm image FTP transmissionDefault blank Transmission interval Number of characters for the directory nameDefault Open Default OFF External terminal output setupDefault Latch Alarm output Pulse widthSet the VMD areas VMD area Default Middle StepDefault None Delete the set VMD area Number of characters for the mail subject 0 Default OFF AddressMail notification Mail bodyAvailable port number 1 Default Retry times Panasonic alarm protocolDefault OFF Destination port Available retry times 1 Default IP addressDefault blank Password Retype password User authenticationDefault OFF User name Number of characters for the password 4 32 charHost authentication Configure the settings of the servers Server setup Configure the settings relating to the mail server MailDefault Passive FTP server address Configure the settings relating to the FTP server FTPFTP mode Number of characters for the FTP server addressDhcp Configuring the network settings Network setupConfigure the network settings Network DNS Ddns Configure the settings relating to Ddns DdnsDefault OFF Host name Number of characters for the host name 1 64 charCamera location Configure the settings relating to Snmp SnmpAccess interval Number of characters for the camera location 0Default blank Interval Default OFF DirectoryDefault blank File name FTP periodic transmissionHow to configure the schedule settings How to delete the set schedule Check the system log System log Maintenance of the camera MaintenanceError message Time & dateUpgrade the firmware Upgrade How to upgrade the firmwareInitialize/restart the camera Initialization Initialize setup dataInitialize setup data and Html data Initialize Html dataALC/ELC Configure the settings relating to the camera operationsCamera ID ShutterSync AGCSens UP White BALPrivacy Zone BW ModeDNR EL-ZOOMMANUAL-ADJ Configure the settings relating to the flange-back BackABF SETUP-SW Lock ABF AutoConfigure the settings on the Special Setup Netmask Configure the network settings NetworkIP Addr GatewayAbout character entry Configure the detailed settingsCamera title can be edited and displayed on the screen Compensate backlight Default OFF StepTo cancel the mask setting Adjust white balance finely Default 30 sec Step Configure the B/W mode settingsDefault High Step Default onSet the privacy zone Adjust the electronic zoom Correct image defects blemishes such as scratches About the Displayed System Log Error indications relating to SmtpError indications relating to FTP Category Cause DescriptionOther error Error indications relating to DdnsError indications relating to NTP Troubleshooting Symptom Cause/solutionSymptom Symptom Cause/solution Reference Pages Solutions Reference Pages Osaka, Japan N1205-0 3TR004271AAA
Related manuals
Manual 3 pages 60.95 Kb