Panasonic WV-NP1004, WV-NP1000 manual SETUP-SW Lock, ABF Auto

Page 53

[SETUP-SW LOCK]

Select "ON" or "OFF" to determine whether or not to use the operation buttons on the camera for the flange-back length adjustment.

ON: The operation buttons on the camera are unavail- able for the flange-back length adjustment.

OFF: The flange-back length can be adjusted using the operation buttons on the camera.

Default: OFF

Important:

Adjust the flange-back length depending on a subject as follows.

Subject/shooting location/environment

Recommended adjustment method

 

 

 

 

 

 

Flange-back length adjustment

 

[C/L ←→ B/W] setting

 

 

 

 

Standard subject

[ABF]

 

"AUTO"

 

 

 

 

Moves frequently

Adjust finely with "MANUAL-

 

PRESET or FIX

Illuminance changes largely

ADJ" after using "ABF".

 

 

Low illuminance

[MANUAL-ADJ]

 

 

Extremely bright or reflects light

 

 

 

Through a window

 

 

 

Location where the lens can get dirt easily

 

 

 

Brightness difference is almost none (white

 

 

 

wall, etc.)

 

 

 

Having large depth

 

 

 

Frickers continuously

 

 

 

Parallel horizontal lines such as a roll-up

 

 

 

door

 

 

 

 

 

 

 

• We assume no responsibility whatsoever for any damages resulting from the use of the auto back focus function.

53

Image 53
Contents WV-NP1004 Contents Trademarks and registered trademarks PrefaceAbout these operating instructions Step Monitoring Images on a PCMonitor images from a single camera About the Live 3Main area One shot buttonOperation Description Available operations when live images are displayedImages will be automatically switched between colour and B/W Monitor images from multiple cameras Transmit an image onto a server automatically Action at an Alarm OccurrenceNotify of alarm occurrences by e-mail Transmit Images onto an FTP Server About SD memory card Use Save images on the SD memory cardObtain images on the SD memory card FTP Equipped security functions Access restrictions by changing the Http portAbout the Network Security of the Camera How to display the setup menu How to operate the setup menu About the operation window Maintenance button Network setup buttonHelp button 1Status display areaConfigure the basic settings Basic Configure the basic settings of the camera Basic setupDaylight saving Summertime Default OFF Link/Access LEDConfigure the settings relating to the NTP server NTP Information about SD memory card About SD memory cardIndication Description FormatImage capture size/Scan mode Configure the settings relating to Jpeg image JPEG/MPEG-4Default 5 fps Image qualityConfigure the settings relating to MPEG-4 image JPEG/MPEG-4 About the operation panel Configure the settings relating to audio Audio IP Address Configures the multi-screen settings Multi-screen setupNumber of characters for the IP address 1 Number of characters for the camera title 0Configure the settings relating to the alarm action Alarm Configure the alarm settings Alarm setupDefault blank Transmission interval Alarm image FTP transmissionDirectory Number of characters for the directory nameDefault Latch Alarm output Default OFF External terminal output setupDefault Open Pulse widthSet the VMD areas VMD area Default Middle StepDefault None Delete the set VMD area Mail notification Default OFF AddressNumber of characters for the mail subject 0 Mail bodyDefault OFF Destination port Panasonic alarm protocolAvailable port number 1 Default Retry times Available retry times 1 Default IP addressDefault OFF User name User authenticationDefault blank Password Retype password Number of characters for the password 4 32 charHost authentication Configure the settings relating to the mail server Mail Configure the settings of the servers Server setupFTP mode Configure the settings relating to the FTP server FTPDefault Passive FTP server address Number of characters for the FTP server addressDhcp Configuring the network settings Network setupConfigure the network settings Network DNS Default OFF Host name Configure the settings relating to Ddns DdnsDdns Number of characters for the host name 1 64 charAccess interval Configure the settings relating to Snmp SnmpCamera location Number of characters for the camera location 0Default blank File name Default OFF DirectoryDefault blank Interval FTP periodic transmissionHow to configure the schedule settings How to delete the set schedule Error message Maintenance of the camera MaintenanceCheck the system log System log Time & dateHow to upgrade the firmware Upgrade the firmware UpgradeInitialize setup data and Html data Initialize setup dataInitialize/restart the camera Initialization Initialize Html dataCamera ID Configure the settings relating to the camera operationsALC/ELC ShutterSens UP AGCSync White BALDNR BW ModePrivacy Zone EL-ZOOMMANUAL-ADJ Configure the settings relating to the flange-back BackABF ABF Auto SETUP-SW LockConfigure the settings on the Special Setup IP Addr Configure the network settings NetworkNetmask GatewayAbout character entry Configure the detailed settingsCamera title can be edited and displayed on the screen Compensate backlight Default OFF StepTo cancel the mask setting Adjust white balance finely Default High Step Configure the B/W mode settingsDefault 30 sec Step Default onSet the privacy zone Adjust the electronic zoom Correct image defects blemishes such as scratches Error indications relating to FTP Error indications relating to SmtpAbout the Displayed System Log Category Cause DescriptionOther error Error indications relating to DdnsError indications relating to NTP Symptom Cause/solution TroubleshootingSymptom Symptom Cause/solution Reference Pages Solutions Reference Pages Osaka, Japan N1205-0 3TR004271AAA
Related manuals
Manual 3 pages 60.95 Kb