Symptom
Cannot access from the browser.
No image is displayed.
Images are displayed blurry.
The image is not being refreshed.
Cause/solution
•Is the power of the camera on?
Check if the power of the camera is turned on.
•Is the viewer software installed on a PC? Install the viewer software on a PC.
•Is the lens cap detached?
Check if the lens cap is detached.
•Aren’t there dusts or dirt on the lens? Check if there are dust or dirt on the lens.
•Is the focus adjusted correctly?
Check if the focus is adjusted correctly.
•Depending on the version of your browser, there might be difficulties refreshing the picture and operating the camera.
It is recommended to use Internet Explorer 6.0 SP2.
•Depending on the traffic of the network or the concen- tration of access to the camera, there might be difficul- ties displaying the camera picture. Click the reload but- ton of the browser to request the camera picture to be refreshed.
Reference
pages
Operating
instructions
(book)
Operating
instructions
(book)
–
–
Operating
instructions
(book)
Operating
instructions
(book)
–
Images cannot be saved on the SD memory card.
• Is the SD memory card inserted correctly? | Operating | |
| instructions | |
| (book) | |
• Is the SD memory card formatted? |
| |
| ||
21 | ||
• Isn’t the write protect switch set to "LOCK"? |
| |
| ||
| ||
When the write protect switch is set to "LOCK", avail- | – | |
able size/total size indication of the SD memory card | ||
| ||
will be "**********KB/**********KB". |
| |
|
|
66