Panasonic WV-NP1004 FTP periodic transmission, Default OFF Directory, Default blank File name

Page 43

Configure the settings relating to the FTP periodic transmission [FTP periodic transmission]

Click the [FTP] tab on the "Server setup" page. (page 37)

The settings relating to the periodic transmission of images to an FTP server can be configured on this page. To transmit images to an FTP server periodically, it is necessary to configure the settings of the FTP server in advance. (page 38)

Refer to page 44 for descriptions of how to configure schedules of image transmission.

Important:

Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat- ed interval or period.

When "ON" is selected for both of the alarm image FTP transmission function and the FTP periodic transmission function, the alarm image FTP transmission function will be given priority over the FTP periodic transmission function. For this reason, images may not be transmitted at the exact designated interval or period if alarms occur frequently.

Note:

Images failed to transmit by the FTP periodic transmission can be saved automatically on the SD memory card.

[FTP periodic transmission]

Select "ON" or "OFF" to determine whether or not to transmit images using the FTP periodic transmission function.

When "ON" is selected, it is necessary to configure the settings of the FTP server. (page 38)

Default: OFF

[Directory]

Enter the directory name where the images are to be saved.

Number of characters for the directory name:

0 - 256 characters

Default: (blank)

[File name]

Enter the file name (name of the image file to be trans- mitted) and select the naming option from the following. With time and date: File name will be ["Entered file

name" + "Time and date (year/month/day/hour/ minute/second)" + "00"].

Without time and date: File name will be the charac- ters entered for "File name" only. When "Without time and date" is selected, the file will be overwritten each time a file is transmitted newly.

Number of characters for the file name: 1 - 32 char-

acters

Default: (blank)

[Interval]

Select the interval for the FTP periodic transmission from the following.

1 sec/2 sec/3 sec/4 sec/5 sec/6 sec/10 sec/15 sec/

20 sec/30 sec/1 min/2 min/3 min/4 min/5 min/6 min/

10 min/15 min/20 min/30 min/1 hour/1.5 hours/2 hours/

3 hours/4 hours/6 hours/12 hours/24 hours Default: 1 sec

43

Image 43
Contents WV-NP1004 Contents About these operating instructions PrefaceTrademarks and registered trademarks Monitor images from a single camera Monitoring Images on a PCStep About the Live 3Main area One shot buttonOperation Description Available operations when live images are displayedImages will be automatically switched between colour and B/W Monitor images from multiple cameras Notify of alarm occurrences by e-mail Action at an Alarm OccurrenceTransmit an image onto a server automatically Transmit Images onto an FTP Server Obtain images on the SD memory card Save images on the SD memory cardAbout SD memory card Use FTP About the Network Security of the Camera Access restrictions by changing the Http portEquipped security functions How to display the setup menu How to operate the setup menu About the operation window 1Status display area Network setup buttonMaintenance button Help buttonConfigure the basic settings Basic Configure the basic settings of the camera Basic setupDaylight saving Summertime Default OFF Link/Access LEDConfigure the settings relating to the NTP server NTP Format About SD memory cardInformation about SD memory card Indication DescriptionImage quality Configure the settings relating to Jpeg image JPEG/MPEG-4Image capture size/Scan mode Default 5 fpsConfigure the settings relating to MPEG-4 image JPEG/MPEG-4 About the operation panel Configure the settings relating to audio Audio Number of characters for the camera title 0 Configures the multi-screen settings Multi-screen setupIP Address Number of characters for the IP address 1Configure the settings relating to the alarm action Alarm Configure the alarm settings Alarm setupNumber of characters for the directory name Alarm image FTP transmissionDefault blank Transmission interval DirectoryPulse width Default OFF External terminal output setupDefault Latch Alarm output Default OpenDefault None Default Middle StepSet the VMD areas VMD area Delete the set VMD area Mail body Default OFF AddressMail notification Number of characters for the mail subject 0Available retry times 1 Default IP address Panasonic alarm protocolDefault OFF Destination port Available port number 1 Default Retry timesNumber of characters for the password 4 32 char User authenticationDefault OFF User name Default blank Password Retype passwordHost authentication Configure the settings relating to the mail server Mail Configure the settings of the servers Server setupNumber of characters for the FTP server address Configure the settings relating to the FTP server FTPFTP mode Default Passive FTP server addressConfigure the network settings Network Configuring the network settings Network setupDhcp DNS Number of characters for the host name 1 64 char Configure the settings relating to Ddns DdnsDefault OFF Host name DdnsNumber of characters for the camera location 0 Configure the settings relating to Snmp SnmpAccess interval Camera locationFTP periodic transmission Default OFF DirectoryDefault blank File name Default blank IntervalHow to configure the schedule settings How to delete the set schedule Time & date Maintenance of the camera MaintenanceError message Check the system log System logHow to upgrade the firmware Upgrade the firmware UpgradeInitialize Html data Initialize setup dataInitialize setup data and Html data Initialize/restart the camera InitializationShutter Configure the settings relating to the camera operationsCamera ID ALC/ELCWhite BAL AGCSens UP SyncEL-ZOOM BW ModeDNR Privacy ZoneABF Configure the settings relating to the flange-back BackMANUAL-ADJ ABF Auto SETUP-SW LockConfigure the settings on the Special Setup Gateway Configure the network settings NetworkIP Addr NetmaskCamera title can be edited and displayed on the screen Configure the detailed settingsAbout character entry To cancel the mask setting Default OFF StepCompensate backlight Adjust white balance finely Default on Configure the B/W mode settingsDefault High Step Default 30 sec StepSet the privacy zone Adjust the electronic zoom Correct image defects blemishes such as scratches Category Cause Description Error indications relating to SmtpError indications relating to FTP About the Displayed System LogError indications relating to NTP Error indications relating to DdnsOther error Symptom Cause/solution TroubleshootingSymptom Symptom Cause/solution Reference Pages Solutions Reference Pages Osaka, Japan N1205-0 3TR004271AAA
Related manuals
Manual 3 pages 60.95 Kb