Panasonic WV-NP1004, WV-NP1000 manual Adjust the electronic zoom

Page 61

Adjust the electronic zoom

Adjust the electronic zoom. The electronic zoom is operable using a remote controller.

Step 1

Select "ON" for "EL-ZOOM" on the "CAMERA SETUP" page.

The "EL-ZOOM" page will be displayed.

**EL-ZOOM**

PAN/TILT

 

PUSH

SW

ZOOM

 

PUSH

SW

 

RET TOP END

Step 2

Move the cursor onto "ZOOM" and press the [SET] but- ton.

Images to which zooming can be applied will be dis- played.

 

 

**EL-ZOOM**

PAN/TILT

 

 

PUSH SW

ZOOM

 

 

 

PUSH SW

 

 

 

 

 

 

 

 

 

 

U

ZOOM D

 

 

 

Step 4

Move the cursor onto "PAN/TILT" and press the [SET] button.

Images to which panning/tilting can be applied will be displayed.

 

 

**EL-ZOOM**

 

 

 

 

PUSH SW

PAN/TILT

ZOOM

 

 

 

PUSH SW

 

 

 

 

U

TILT D/L PAN R

 

RET TOP END

Important:

"PAN/TILT" is available only when images are zoomed in.

Step 5

Adjust panning/tilting level pressing the [Left], [Right], [Up] and [Down] buttons. After completing the adjust- ment, press the [SET] button.

The "EL-ZOOM" page will be displayed.

RET TOP END

Step 3

Adjust zooming level pressing the [Up] and [Down] but- tons. After completing the adjustment, press the [SET] button.

The "EL-ZOOM" page will be displayed.

61

Image 61
Contents WV-NP1004 Contents About these operating instructions PrefaceTrademarks and registered trademarks Monitor images from a single camera Monitoring Images on a PCStep About the Live 3Main area One shot buttonOperation Description Available operations when live images are displayedImages will be automatically switched between colour and B/W Monitor images from multiple cameras Notify of alarm occurrences by e-mail Action at an Alarm OccurrenceTransmit an image onto a server automatically Transmit Images onto an FTP Server Obtain images on the SD memory card Save images on the SD memory cardAbout SD memory card Use FTP About the Network Security of the Camera Access restrictions by changing the Http portEquipped security functions How to display the setup menu How to operate the setup menu About the operation window Maintenance button Network setup buttonHelp button 1Status display areaConfigure the basic settings Basic Configure the basic settings of the camera Basic setupDaylight saving Summertime Default OFF Link/Access LEDConfigure the settings relating to the NTP server NTP Information about SD memory card About SD memory cardIndication Description FormatImage capture size/Scan mode Configure the settings relating to Jpeg image JPEG/MPEG-4Default 5 fps Image qualityConfigure the settings relating to MPEG-4 image JPEG/MPEG-4 About the operation panel Configure the settings relating to audio Audio IP Address Configures the multi-screen settings Multi-screen setupNumber of characters for the IP address 1 Number of characters for the camera title 0Configure the settings relating to the alarm action Alarm Configure the alarm settings Alarm setupDefault blank Transmission interval Alarm image FTP transmissionDirectory Number of characters for the directory nameDefault Latch Alarm output Default OFF External terminal output setupDefault Open Pulse widthDefault None Default Middle StepSet the VMD areas VMD area Delete the set VMD area Mail notification Default OFF AddressNumber of characters for the mail subject 0 Mail bodyDefault OFF Destination port Panasonic alarm protocolAvailable port number 1 Default Retry times Available retry times 1 Default IP addressDefault OFF User name User authenticationDefault blank Password Retype password Number of characters for the password 4 32 charHost authentication Configure the settings relating to the mail server Mail Configure the settings of the servers Server setupFTP mode Configure the settings relating to the FTP server FTPDefault Passive FTP server address Number of characters for the FTP server addressConfigure the network settings Network Configuring the network settings Network setupDhcp DNS Default OFF Host name Configure the settings relating to Ddns DdnsDdns Number of characters for the host name 1 64 charAccess interval Configure the settings relating to Snmp SnmpCamera location Number of characters for the camera location 0Default blank File name Default OFF DirectoryDefault blank Interval FTP periodic transmissionHow to configure the schedule settings How to delete the set schedule Error message Maintenance of the camera MaintenanceCheck the system log System log Time & dateHow to upgrade the firmware Upgrade the firmware UpgradeInitialize setup data and Html data Initialize setup dataInitialize/restart the camera Initialization Initialize Html dataCamera ID Configure the settings relating to the camera operationsALC/ELC ShutterSens UP AGCSync White BALDNR BW ModePrivacy Zone EL-ZOOMABF Configure the settings relating to the flange-back BackMANUAL-ADJ ABF Auto SETUP-SW LockConfigure the settings on the Special Setup IP Addr Configure the network settings NetworkNetmask GatewayCamera title can be edited and displayed on the screen Configure the detailed settingsAbout character entry To cancel the mask setting Default OFF StepCompensate backlight Adjust white balance finely Default High Step Configure the B/W mode settingsDefault 30 sec Step Default onSet the privacy zone Adjust the electronic zoom Correct image defects blemishes such as scratches Error indications relating to FTP Error indications relating to SmtpAbout the Displayed System Log Category Cause DescriptionError indications relating to NTP Error indications relating to DdnsOther error Symptom Cause/solution TroubleshootingSymptom Symptom Cause/solution Reference Pages Solutions Reference Pages Osaka, Japan N1205-0 3TR004271AAA
Related manuals
Manual 3 pages 60.95 Kb