Zebra Technologies Z6M manual 0HGLDDQG5LEERQ5HTXLUHPHQWV, 5HSRUWLQJDPDJH, 6WRUDJH

5HSRUWLQJ￿'DPDJH

If you discover shipping damage:

•Immediately notify the shipping company and file a damage report. Zebra Technologies Corporation is not responsible for any damage incurred during the shipment of the equipment and will not repair this damage under warranty.

•Keep the carton and all packing material for inspection.

•Notify your local Zebra reseller.

6WRUDJH￿

If you are not placing the printer into operation immediately, repackage it using the original packing materials. The printer may be stored under the following conditions:

•Temperature: –40° F to 140° F (–40° C to 60° C)

•Relative humidity: 5% to 85%, non-condensing

0HGLD￿DQG￿5LEERQ￿5HTXLUHPHQWV

Since print quality is affected by media and ribbon, printing speeds, and printer operating modes, it is very important to run tests for your applications.

We strongly recommend the use of Zebra Technologies Corporation-brand supplies for continuous high-quality printing. A wide range of paper, polypropylene, polyester, and vinyl stock has been specifically engineered to enhance the printing capabilities of the printer and to ensure against premature printhead wear.

•Continuous roll media, fanfold media, or card stock with optional perforations and registration holes may be used.

•Printhead life may be reduced by the abrasion of exposed paper fibers when using perforated media.

•The ribbon MUST be as wide as or wider than the media being used. If the ribbon is narrower than the media, areas of the printhead are unprotected and subject to premature wear. (When printing in direct thermal mode, ribbon is not used and should not be loaded in the printer.)

2 Zebra Z4M/Z6M Printers User’s Guide