Zebra Technologies Z6M manual Label Positioning Parameters, Backfeed, Label TOP, Left Position

Label Positioning Parameters

Display Shows	Action/Explanation
	Backfeed Sequence: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
	Default: Default (90%)
	Selections: Default, after, before, 10%, 20%, 30%, 40%, 50%, 60%, 70%,
	80%, off
	This parameter establishes when and how much label backfeed occurs after a
BACKFEED	label is removed or cut in the peel-off or cutter modes. It has no effect in rewind
	or tear-off modes. This parameter setting can be superseded by the ~JS
	instruction when received as part of a label format (refer to the ZPL II
	Programming Guide Volume I).
	NOTE: The difference between the value entered and 100% establishes how
	much backfeed occurs before the next label is printed. For example, a
	value of 40 means that 40% of the backfeed takes place after the label is
	removed or cut. The remaining 60% takes place before the next label is
	printed. A value of “before” means that all backfeed takes place before
	the next label is printed.
	Adjusting Label Top Position: Press the INCREMENT (+) key to increase the
	value, press the DECREMENT (–) key to decrease the value. The displayed
	value represents dots.
	Default: +0
LABEL TOP	Range: –120 to +120 dot rows
	The label top position adjusts the print position vertically on the label. Positive
	numbers adjust the label top position further down the label (away from the
	printhead); negative numbers adjust the position up the label (toward the
	printhead).
	Adjusting Left Position: Press the DECREMENT (–) key to move to the next
	position, press the INCREMENT (+) key to change between + and – and to
	increase the value of the digit. The displayed value represents dots.
	Default: 0000
	Range: –9999 to +9999
LEFT POSITION	NOTE: For a negative value, enter the value before changing to the minus
	sign.
	This parameter establishes how far from the left edge of a label the format
	begins to print by adjusting horizontal positioning on the label. Positive numbers
	adjust the printing to the left by the number of dots selected; negative numbers
	shift printing to the right.

Zebra Z4M/Z6M Printers User’s Guide 51