&RQILJXULQJWKH6RIWZDUHRU3ULQWHU'ULYHU
Many printer settings may also be controlled by your printer’s driver or label preparation software. Refer to the driver or software documentation for more information.
3ULQWLQJD7HVW/DEHO
To print a test label:
1.Turn off the printer.
2.Press and hold the CANCEL key while turning on the printer.
3.Release the CANCEL key after the DATA light turns off (approximately five seconds).
A configuration label prints showing the printer’s currently stored parameters (similar to the labels shown in Figure 10).
If you encounter any problems while you are configuring the printer or printing a test label, refer to “Troubleshooting” beginning on page 69. Otherwise, refer to See “Establishing Communication” beginning on page 17 to set up the communication parameters.
Figure 10
Zebra Z4M/Z6M Printers User’s Guide | 15 |