Zebra Technologies Z6M manual Default English, Language, Default Permanent, Save Settings

Display Shows	Action/Explanation
	Selecting the Display Language: Press the INCREMENT (+) or DECREMENT
	(–) key to display other choices.
	Default: English
LANGUAGE	Selections: English, Spanish, French, German, Italian, Norwegian,
	Portuguese, Swedish, Danish, Spanish 2, Dutch, Finnish, Japanese
	This parameter allows you to change the language used on the front panel display.

You have now completed the entire configuration and calibration sequence. You may either press the SELECT key or the SETUP/EXIT key.

You are now back at the first parameter in the configuration sequence.

DARKNESS	NOTE: If you pressed the SELECT key but are through programming the
	printer configuration, you may press the SETUP/EXIT key and continue
	with the “SAVE SETTINGS” function.
	Save Settings: Press the INCREMENT (+) or DECREMENT (–) key to display
	other choices.
	Default: Permanent
	Selections: Permanent, temporary, cancel, load defaults, load last save
	This display appears when you attempt to exit the configuration mode.
	• Permanent: Permanently saves the changes, even when printer power is turned
SAVE SETTINGS	off.
	• Temporary: Saves the changes until you change the values again or until power is
	turned off.
	• Cancel: Cancels all changes from the time you entered the configuration mode
	except for darkness and tear-off position (if they were changed).
	• Load defaults: Loads factory defaults.
	• Load last save: Loads the values from the last permanent save.
	Press the SETUP/EXIT key to activate the displayed choice.
PRINTER READY	You have exited the configuration and calibration sequence and are now ready for
	normal printer operation.

54 Zebra Z4M/Z6M Printers User’s Guide