Zebra Technologies Z6M manual Liner Removal

17.If the printer is paused (the PAUSE light is on), press the PAUSE key to enable printing.

Peeling starts automatically. Press the FEED key to test.

	Tear-off/		Transmissive			Media Supply Guide
Peel-off Bar				Sensor
Value		Printhead
Peel
		Assembly
Lever
					Dancer	Media
Label			Ribbon		Media	Supply
			Sensor		Guide	Hanger
		Printhead Open Lever				Liner Take-up
Value Peel Assembly

Figure 17

Liner Removal

1. Pull the liner slide toward you (see inset) until it	Liner Slide
stops (about a third of the way down the liner
take-up spindle).

2. Slide the liner from the take-up spindle.

Liner Slide Tab

NOTE: The liner slide moves smoothly back into place on the liner take-up spindle once the liner has been removed.

Zebra Z4M/Z6M Printers User’s Guide 27