Zebra Technologies Z6M Selecting ZPL Mode, Default ZPL, Selections ZPL II, ZPL, Default Feed

Selecting ZPL Mode

Display Shows	Action/Explanation
	Selecting ZPL Mode: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
	Default: ZPL II
	Selections: ZPL II, ZPL
ZPL MODE	The printer remains in the selected mode until it is changed by this front panel
	instruction or by using a ZPL/ZPL II command. The printer accepts label formats
	written in either ZPL or ZPL II. This eliminates the need to rewrite any ZPL
	formats you already have. Refer to the ZPL II Programming Guide Volume II for
	more information on the differences between ZPL and ZPL II.
Power-Up and Head Close Parameters
	Media Power Up: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
	Default: Feed
	Selections: Feed, calibration, length, and no motion
MEDIA POWER UP	This parameter establishes the action of the media when the printer is turned on.
	• Calibration: Recalibrates the media and ribbon sensors.
	• Feed: Feeds the label to the first web.
	• Length: Determines the length of the label.
	• No Motion: Media does not move.
	Head Close: Press the INCREMENT (+) or DECREMENT (–) key to display
	other choices.
	Default: Feed
	Selections: Feed, calibration, length, no motion
HEAD CLOSE	Determines the action of the media after the printhead has been opened and
	then closed.
	• Calibration: Recalibrates the media and ribbon sensors.
	• Feed: Feeds the label to the first web.
	• Length: Determines the length of the label.
	• No Motion: Media does not move.

50 Zebra Z4M/Z6M Printers User’s Guide