Zebra Technologies Z6M manual $GMXVWLQJWKH5HIOHFWLYH6HQVRU, 7UDQVPLVVLYH6HQVRU

$GMXVWLQJ￿WKH￿5HIOHFWLYH￿6HQVRU

Refer to Figure 7.

1.Open the printhead assembly by pressing the printhead open lever.

2.Locate the reflective sensor positioning lever.

3.Move the reflective sensor positioning lever across the width of the media until the reflective sensor aligns with the start-of-label indicator. The glow of the red light assists in the proper placement of the reflective sensor.

4.Close the printhead assembly.

Printhead Assembly

Reflective

Sensor

	Reflective
	Sensor
	Positioning
Printhead Open	Lever
Lever

Figure 7

7UDQVPLVVLYH￿6HQVRU

The transmissive sensor is in a fixed position and enabled via the front panel (refer to “SENSOR SELECT” on page 41 for details).

10 Zebra Z4M/Z6M Printers User’s Guide