3$86(.H\6HOI7HVW
This self test can be used to provide the test labels required when making adjustments to the printer’s mechanical assemblies. See the sample printout in Figure 31.
1.Turn off the printer.
2.Press and hold the PAUSE key while turning on the power.
3. Release the PAUSE key after the | Figure 31 | |
DATA light turns off (approximately | ||
| ||
five seconds). |
|
•The initial self test prints 15 labels at 2" (51 mm) per second, then automatically pauses the printer. When the PAUSE key is pressed, an additional 15 labels print.
•Pressing the CANCEL key while the printer is paused alters the self test. When the PAUSE key is pressed, the printer prints 15 labels at 6" (152 mm) per second.
•Pressing the CANCEL key again while the printer is paused alters the self test again. When the PAUSE key is pressed, the printer prints 50 labels at
2" (51 mm) per second.
•Pressing the CANCEL key again while the printer is paused alters the self test a third time. When the PAUSE key is pressed, the printer prints 50 labels at 6" (152 mm) per second.
•Pressing the CANCEL key again while the printer is paused alters the self test a fourth time. When the PAUSE key is pressed, the printer prints 15 labels at the printer’s maximum speed.
•To exit this self test at any time, press and hold the CANCEL key.
Zebra Z4M/Z6M Printers User’s Guide | 77 |