Zebra Technologies Z6M Æïao’‹Æˆ‹›€Íÿ--Ø›‹Yaï‹Ÿ›, Vwhp&Rqvlghudwlrqv, Qwhuidfhv, DWD6SHFLILFDWLRQV

￿ÆÏAO’‹Æˆ‹›€Í￿Ÿ––Ø›‹YAÏ‹Ÿ›

6\VWHP￿&RQVLGHUDWLRQV￿

,QWHUIDFHV

The method of interfacing this printer to a data source depends on the communication options installed in the printer. The standard interfaces are an RS-232/RS-422/RS-485 serial data port and an IEEE 1284 compliant bi-directional parallel port. The optional ZebraNet® PrintServer II enables printers to be connected to 10Base-T Ethernet networks.

'DWD￿6SHFLILFDWLRQV￿

When communicating via an asynchronous serial data port (refer to Figure 11), the baud rate, number of data and stop bits, parity, and handshaking are user selectable (default settings are 9600 baud, 8 data bits, 1 stop bit, no parity, and XON/XOFF). Parity only applies to data transmitted by the printer since the parity of received data is ignored. Refer to page 46 to configure the communication parameters for the printer. The values selected must be the same as those used by the host equipment connected to the printer.

Printer	Computer
Male
25
	25
Male
25
	9
Null modem adapter	Female
(if using a standard
modem cable)
50’ (15 m) maximum

Figure 11

Zebra Z4M/Z6M Printers User’s Guide 17