Zebra Technologies Z6M manual Default Tear-off, Default Web, Selections Web, mark, Sensor Select

Display Shows	Action/Explanation
	Selecting Print Mode: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
	Default: Tear-off
PRINT MODE	Selections: Tear-off, cutter, peel-off, liner take-up, rewind
	Print mode settings tell the printer the method of media delivery that you wish to
	use. Be sure to select a print mode that your hardware configuration supports as
	some selections displayed are for optional printer features.
	Setting Media Type: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
	Default: Continuous
	Selections: Continuous, non-continuous
MEDIA TYPE	This parameter tells the printer the type of media you are using. Selecting
	continuous media requires that you include a label length instruction in your label
	format (^LLxxxx if you are using ZPL or ZPL II).
	When non-continuous media is selected, the printer feeds media to calculate label
	length (the distance between two detections of the inter-label gap, webbing, or
	alignment notch or hole).
	Setting the Sensor Type: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
	Default: Web
	Selections: Web, mark
SENSOR TYPE	This parameter tells the printer whether you are using media with a web (gap/space
	between labels, notch, or hole) to indicate the separation between labels or if you
	are using media with a black mark printed on the back. If your media does not have
	black marks on the back, leave your printer at the default setting (web).
	Setting the Sensor Select: Press the INCREMENT (+) or DECREMENT (–) key to
	display other choices.
	Default: Auto select
	Selections: Auto select, reflective, transmissive
SENSOR SELECT	This parameter tells the printer the sensor you wish to use. “Auto select” is
	compatible with most types of media. However, if you encounter difficulties with
	calibration, refer to “Types of Media” on page 6 to help you choose the appropriate
	sensor for your media. (Select the reflective sensor with either continuous or non-
	continuous black mark media; choose the transmissive sensor if you are using non-
	continuous web media.)

Zebra Z4M/Z6M Printers User’s Guide 41