Zebra Technologies Z6M manual 5HZLQG0HGLD$OLJQPHQW

5HZLQG￿0HGLD￿$OLJQPHQW

(Rewind option required)

NOTE: The media /backing should be installed flush against the backplate of the take-up spindle to prevent the media/backing from winding too loosely.

Perform the following adjustment if the media does not track properly onto the take-up spindle.

Refer to Figure 29.

1.Turn the adjustment dial clockwise to align the media/backing material toward the inboard (i.e., mainframe or electronics) side. This is the most likely adjustment.

or

2.Turn the dial counterclockwise to align the media/backing material toward the outboard (i.e., away from the mainframe or electronics) side.

Printhead
Assembly	Backplate
	Take-up
Adjustment	Spindle
Dial

Figure 29

Zebra Z4M/Z6M Printers User’s Guide 67