Zebra Technologies Z6M manual OHDQLQJWKH9DOXH3HHORII0RGXOH

&OHDQLQJ￿WKH￿9DOXH￿3HHO￿RII￿0RGXOH￿

(Value peel-off option required)

Perform the following procedure if adhesive buildup begins to affect peel-off performance.

Refer to Figure 26.

1.Open the printhead assembly.

2.Close the value peel assembly (if open) to prevent bending the tear-off/peel-off bar during cleaning. Use a swab or cue tip soaked with a solvent to remove adhesive from the tear-off/peel-off bar.

CAUTION: Apply minimum force when cleaning the tear-off/peel-off bar! Excessive force can cause the tear-off/peel-off bar to bend, which could have a negative effect on peel performance.

3.Open the value peel assembly by pivoting the module toward you.

4.Manually rotate the pinch roller and clean thoroughly with solvent and a swab.

NOTE: When cleaning the tear-off/peel-off bar or the pinch roller, remove excess solvent with a pad to ensure the solvent has dried before printing.

5.Close the value peel assembly.

6.Close the printhead assembly.

Printhead Assembly

Tear-off/Peel-off Bar

Pinch Roller

Value Peel Assembly

Figure 26

Zebra Z4M/Z6M Printers User’s Guide 63