Netopia 3300-ENT manual Connection Profiles and Default Profile

IP Setup 6-15

+----------------------------------------------------------			+
+----------------------------------------------------------			+
Are you sure you want to delete this RIP MD5 Key?
	CANCEL	CONTINUE
+----------------------------------------------------------			+

Connection Profiles and Default Profile

RIP-2 MD5 authentication may be configured in Connection Profiles, as well. If you are not using NAT, your public Internet connection can benefit from sending authenticated RIP packets as well as receiving them. To configure RIP-2 MD5 authentication for a Connection Profile, you can either change an existing Connection Profile, or create a new one.

The Default Profile Leased and Switched menus are the same as the Connection Profile RIP option and associated menus. For brevity, the following example shows only the Connection Profile RIP option and associated menus.

In either case, navigate to the RIP Profile Parameters screen under the IP Profile Parameters menu of the Display/Change (or Add) Connection Profile screen.

Main

Menu

WAN

Configuration

Display/Change	IP Profile
(or Add)
	Parameters
Connection Profile

RIP Profile

Options

The connection profile RIP Profile Parameters screen appears.