3-28 Firmware User Guide
The IP Profile Parameters screen, found under the WAN Configuration menu, Add/Change Connection Profile screen, appears as shown.
IP Profile Parameters
Address Translation Enabled: | Yes |
IP Addressing... | Numbered |
NAT Map List... |
|
NAT Server List... | |
NAT Options... |
|
Stateful Inspection Enabled: | No |
Local WAN IP Address: | 0.0.0.0 |
Local WAN IP Mask: | 0.0.0.0 |
Filter Set... |
|
Remove Filter Set |
|
RIP Profile Options...
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
If you select NAT Options, in either case, the NAT Options screen appears.
NAT Options
IP Passthrough Enabled: | No |
Toggle ON to allow local WAN IP address to be used on LAN in addition to NAT.
If you toggle IP Passthrough Enabled to Yes, additional field(s) appear.
