Internet Key Exchange (IKE) IPsec Key Management for VPNs 5-15
Last Address. You supply these values.
Complete the Local Member 1st Address and Local Member Last Address fields.
•If you choose Host Address, you need only supply the Remote Member Address and the Local Mem- ber Address; the other fields are hidden.
•Select COMMIT and press Return to add the configuration. This returns you to the IP Profile Parameters screen. Select COMMIT and press Return in the IP Profile Parameters screen. This returns you to the Change Connection Profile screen. Select COMMIT and press Return in the Change Connection Profile screen.
Note:
•Any two IPsec tunnels differ only by the local/remote networks they are intended to reach; they have the same encryption policy, which is derived from the base profile.
•The feature is limited to 8 networks per tunnel.
If you return to the IP Profile Parameters screen, two new fields are displayed:
IP Profile Parameters
Remote Tunnel Endpoint: | 0.0.0.0 |
Add Network... |
|
Display/Change Network... |
|
Delete Network... |
|
Address Translation Enabled: | No |
Filter Set... | <<None>> |
Remove Filter Set |
|
Advanced IP Profile Options... |
|
COMMIT | CANCEL |
Enter the IP Address or hostname of the remote tunnel endpoint.
•Display/Change Network allows you to make changes to existing network configurations you have made. If you select Display/Change Network, a list of your configured networks displays.
