1-4 Firmware User Guide
Configuring Telnet software
If you are configuring your device using a Telnet session, your computer must be running a Telnet software program.
•If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or run Telnet from the Start menu.
•If you connect a Macintosh computer running Classic Mac OS, you can use the NCSA Telnet program supplied on the Netopia CD. You install NCSA Telnet by dragging the application from the CD to your hard disk.
Mac OS X users can use the Terminal application that comes with Mac OS X in the Utilities folder.
Navigating through the Telnet Screens
Use your keyboard to navigate the Netopia Firmware Version 8.4’s configuration screens, enter and edit information, and make choices. The following table lists the keys to use to navigate through the Telnet screens.
To... | Use These Keys... |
|
|
Move through selectable items in a screen or | Up, Down, Left, and Right Arrow |
|
|
Set a change to a selected item or open a | Return or Enter |
options for a selected item like entering an upgrade key |
|
|
|
Change a toggle value (Yes/No, On/Off) | Tab |
|
|
Restore an entry or toggle value to its previous value | Esc |
|
|
Move one item up | Up arrow or Control + K |
|
|
Move one item down | Down arrow or Control + O |
|
|
Display a dump of the device event log | Control + E |
|
|
Display a dump of the WAN event log | Control + F |
|
|
Refresh the screen | Control + L |
|
|
