
WAN and System Configuration 2-13
•The Receive RIP
A Transmit RIP
Routing Information Protocol (RIP) is needed if there are IP routers on other segments of your Ethernet network that the Netopia Router needs to recognize. Set to “Both” (the default) Netopia Firmware Version 8.4 will accept information from either RIP v1 or v2 routers. Alternatively, select Receive RIP and select v1, v2, or v2 MD5 Authentication from the popup menu. With Receive RIP set to “v1,” the Netopia Router’s Ethernet port will accept routing information provided by RIP packets from other routers that use the same subnet mask. Set to “v2,” the Netopia Firmware Version 8.4 will accept routing information provided by RIP packets from other routers that use different subnet masks.
For more information on v2 MD5 Authentication, see
7.Return to the Add Connection Profile screen by pressing Escape.
8.Select COMMIT and press Return. Your new Connection Profile will be added.
If you want to view the Connection Profiles in your device, return to the WAN Configuration screen, and select Display/Change Connection Profile. The list of Connection Profiles is displayed in a scrolling
| WAN Configuration |
|
IP | + | |
+ | ||
Easy Setup Profile | 255.225.255.255 | |
Profile 1 | 0.0.0.0 | |
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
| ||
+ |
You can also delete Connection Profiles by selecting them in the same manner using the Delete Connection Profile option in the WAN Configuration screen.