6-34 Firmware User Guide
Main
Menu
WAN Configuration
Add/Display/Change
Connection Profile
IP Profile Parameters |
| |
Address Translation Enabled: | Yes |
|
IP Addressing... | Numbered |
|
NAT Map List... |
| |
NAT Server List... |
| |
Local WAN IP Address: | 0.0.0.0 |
|
Local WAN IP Mask: | 0.0.0.0 |
|
Remote IP Address: | 0.0.0.0 |
|
Remote IP Mask: | 0.0.0.0 |
|
Filter Set... | ||
Remove Filter Set | + | |
| None | |
| Rx. | |
Multicast Forwarding... | + | |
|
| |
RIP Profile Options... |
|
|
Typically, you will have a Connection Profile that you created in Easy Setup. You may have more. Select the Connection Profile that you want to use from the Display/Change Connection Profile menu, and then select IP Profile Parameters.
By default, Multicast Forwarding is turned off (None) on Connection Profiles until you enable a specific Connection Profile to receive multicast data. You enable it by selecting Rx. from the
