Netopia 3300-ENT manual Adsl Line Configuration screen is shown below, ATM Circuit Configuration

2-4 Firmware User Guide

If you want the Netopia Router to advertise its routing table to other routers via RIP, select Transmit RIP and select v1, v2 (broadcast), or v2 (multicast) from the popup menu. With Transmit RIP v1 selected, the Netopia Firmware Version 8.4 will generate RIP packets only to other RIP v1 routers. With Transmit RIP v2 (broadcast) selected, the Netopia Firmware Version 8.4 will generate RIP packets to all other hosts on the network. With Transmit RIP v2 (multicast) selected, the Netopia Firmware Version 8.4 will generate RIP packets only to other routers capable of recognizing RIP v2 packets.

ADSL Line Configuration screen

The ADSL Line Configuration screen is shown below:

ADSL Line Configuration

Circuit Type...	Multimode
Trellis Coding Enabled:	On
Signaling Mode...	FDM
Fast Retrain Enabled:	On
Wiring Type...	AutoSense
Data Link Encapsulation...	RFC1483

1.Select Circuit Type and from the pop-up menu choose the type of circuit to which you will be connecting: Multimode, T1.413, G.dmt, or G.lite.

2.Select Trellis Coding Enabled. Toggle it to On (the default) or Off.

3.Select Signaling Mode and choose Echo Cancellation or FDM (the default).

4.If you selected Multimode Circuit Type, the Fast Retrain Enabled field appears. Toggle it to On (the default) or Off.

5.The Wiring Type pop-up menu allows you to choose the type of copper pair wiring in use at your location. Usually, the default AutoSense will detect the type and adjust itself accordingly. If you want to set it yourself, and you know the type of wiring you have, choose either Tip/Ring (Inner Pair) or A/A1 (Outer Pair) from the pop-up menu.

6.Select Data Link Encapsulation and press Return. The pop-up menu will offer you the choice of PPP or RFC1483.

ATM Circuit Configuration

On ADSL WAN interfaces, the Asynchronous Transfer Mode (ATM) connection between the router and the central office equipment (DSLAM) is divided logically into one or more virtual circuits (VCs). A virtual circuit may be either a permanent virtual circuit (PVC) or a switched virtual circuit (SVC). Netopia Routers support PVCs.