9-26 Firmware User Guide
Adding filters to a filter set
There are two kinds of filters you can add to a filter set: input and output. Input filters check packets received from the Internet, destined for your network. Output filters check packets transmitted from your network to the Internet.
WAN 
packet |
input filter |
packet |
output filter |
The Netopia Router
LAN
Packets in the Netopia Firmware Version 8.4 pass through an input filter if they originate in the WAN and through an output filter if they’re being sent out to the WAN.
The process for adding input and output filters is exactly the same. The main difference between the two involves their reference to source and destination. From the perspective of an input filter, your local network is the destination of the packets it checks, and the remote network is their source. From the perspective of an output filter, your local network is the source of the packets, and the remote network is their destination.
Type of filter | Source means | Destination means |
|
|
|
|
|
|
Input filter | The remote network | The local network |
|
|
|
Output filter | The local network | The remote network |
|
|
|
To add a filter, select Display/Change Filter Set in the Filter Set screen. From the
