Netopia 3300-ENT manual Adding an IKE Phase 1 Profile, ADD PH1 Profile

5-4 Firmware User Guide

	+-IKE Phase1 Profile--+
	+---------------------+
	<<ADD PH1 PROFILE>>
	<<NONE>>
Key Management...
IKE Phase 1 Profile
Encapsulation...
ESP Encryption Tran
ESP Authentication		5-96
Compression Type...
Advanced IPsec Opti
COMMIT	+---------------------+

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.

•A pop-up window displays a list of IKE Phase 1 Profiles that you have configured. If you have not previously configured an IKE Phase 1 Profile, the selection ADD PH1 PROFILE allows you to do that now.

Adding an IKE Phase 1 Profile

IKE Phase 1 Profiles contain the information that the two ends of a tunnel use to authenticate each other and the parameters that govern the public key cryptography exchanges that are required to generate new keys periodically. Make sure to add an IKE Phase 1 Profile. If an IKE Phase 1 Profile is not assigned to an IKE Connection Profile, all VPN traffic for that profile will be discarded.

Select ADD PH1 PROFILE. The Add IKE Phase 1 Profile screen appears.

Add IKE Phase 1 Profile

Profile Name:	IKE Profile 1
Mode...	Aggressive Mode
Local Identity Type...	IPv4 Address
Local Identity Value:	0.0.0.0
Remote Identity Type...	IPv4 Address
Remote Identity Value:	0.0.0.0
Authentication Method...	Shared Secret
Shared Secret:	********************
Encryption Algorithm...	des
Hash Algorithm...	md5
Diffie-Hellman Group...	Group 2 (1024 bits)
Advanced IKE Phase 1 Options...
ADD IKE PHASE 1 PROFILE	CANCEL