Netopia 3300-ENT manual +--NAT Map List Name

3-22 Firmware User Guide

IP Profile Parameters

+--NAT Map List Name---	+
+----------------------	+
Address Trans Easy-PAT	s
IP Addressing my_map	mbered
<<None>>
NAT Map List.	sy PAT
NAT Server Li
Local WAN IP
Remote IP Add	7.0.0.2
Remote IP Mas	5.255.255.255
Filter Set...	tBIOS Filter
Remove Filter
Receive RIP:	th
+----------------------	+

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.

•Select the map list you want to bind to this Connection Profile and press Return. The map list you selected will now be bound to this Connection Profile.

•Select NAT Server List and press Return. A pop-up menu displays a list of your defined server lists.

IP Profile Parameters

+-NAT Server List Name-+

+----------------------	+
Address Trans Easy-Servers	s
IP Addressing my_servers	mbered
<<None>>
NAT Map List.	sy PAT
NAT Server Li
Local WAN IP	0.0.0
Local WAN IP	0.0.0
Remote IP Add	7.0.0.2
Remote IP Mas	5.255.255.255
Filter Set...	tBIOS Filter
Remove Filter
Receive RIP:	th
+----------------------	+

Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.

•Select the server list you want to bind to this Connection Profile and press Return. The server list you selected will now be bound to this Connection Profile.

Note: There is no interdependency between NAT and IP Addressing. Also, the Local WAN IP Address and Mask fields’ visibility are dependent only on the IP Addressing type.