Netopia 3300-ENT manual Atdt

Line Backup 7-9

Choose the interface to configure for backup, MODEM (Wan Module 2) Setup.

The Internal Modem Setup screen appears.

Internal Modem Setup

Modem Dialing Prefix:	ATDT
PBX Dialing Prefix:
Line Directory Number:
Speaker On...	Until Carrier
Speaker Volume...	2-Medium
Answer Incoming calls...	Always
Country...	United States

Enter the dialing prefix to be sent to all modems.

•Modem Dialing Prefix: ATDT is the standard Hayes-compatible code for alerting the modem itself. You probably don’t need to change this, unless you have a good reason and are familiar with the Hayes modem command set.

•PBX Dialing Prefix: If you are connected to a Centrex or PBX phone system that requires you to dial a prefix number (such as “9” for an outside line), enter it here.

•Line Directory Number: Enter the telephone number for the line you are connected to.

•Speaker On: You can set how you want to hear dialing and connection tones generated by the modem, or

you can turn them off, from the pull-down menu. Options are: Never, Until Carrier, During Answer, Always.

•Speaker Volume: You can set how loud the modem tones will be from the pull-down menu: 1-Softest, 2-Medium, 3-Loudest.

•Answer Incoming calls: You can determine whether or not the modem will respond to incoming calls on

this line, from the pull-down menu: Always or Never.

•Country: Select your country from the pull-down menu.

When you are finished, press Escape.