Netopia 3300-ENT manual Binding Map Lists and Server Lists, IP profile parameters

Multiple Network Address Translation 3-21

Binding Map Lists and Server Lists

Once you have created your map lists and server lists, for most Netopia Router models you must bind them to a profile, either a Connection Profile or the Default Profile. You do this in one of the following screens:

•the IP profile parameters screen (see below) of the Connection Profile configuration menu

•the IP Parameters (WAN Default Profile) screen (see page 3-23) of the Default Profile configuration menu

•the Binding Map Lists and Server Lists screen (see page 3-21)

IP profile parameters

To bind a map list to a Connection Profile, from the Main Menu go to the WAN Configuration screen then the Display/Change Connection Profile screen. From the pop-up menu list of your Connection Profiles, choose the one you want to bind your map list to. Select IP Profile Parameters and press Return.

Main

Menu

WAN

Configuration

Display/Change

Connection Profile

IP Profile

Parameters

The IP Profile Parameters screen appears.

IP Profile Parameters

Address Translation Enabled:	Yes
IP Addressing...	Unnumbered
NAT Map List...	Easy-PAT List
NAT Server List...	Easy-Servers
Local WAN IP Address:	206.1.1.6
Local WAN IP Mask:	0.0.0.0
Remote IP Address:	127.0.0.2
Remote IP Mask:	255.255.255.255
Filter Set...	Basic Firewall
Remove Filter Set

RIP Profile Options...

Configure IP requirements for a remote network connection here.

•Select NAT Map List and press Return. A pop-up menu displays a list of your defined map lists.