2-10 Firmware User Guide
Multiple Data Link Encapsulation Settings
4.Select Encapsulation Options and press Return.
•If you selected ATMP, PPTP, L2TP, or IPSec, see Chapter 4, “Virtual Private Networks (VPNs).”
•If you selected PPP or RFC1483, the screen offers different options:
| Add Connection | Profile | Add Connection Profile | |
Profile Name: |
| Profile 1 | Profile Name: | Profile 1 |
Profile Enabled: |
| Yes | Profile Enabled: | Yes |
Encapsulation Type | ...+--------------+ | Encapsulation Type... | PPP | |
| Underlying Encapsulation... | None | ||
RFC1483 Mode... | Bridged 1483 | PPP Mode... | VC Multiplexed | |
| Routed 1483 | Encapsulation Options... |
| |
| + |
|
| |
IP Profile Parameters... |
| IP Profile Parameters... |
| |
|
|
| Interface Group... | Primary |
COMMIT |
| CANCEL | COMMIT | CANCEL |
Configure a new Conn. Profile. Finished? COMMIT or CANCEL to exit.
•If you selected RFC1483, the screen allows you to choose Bridged 1483 or Routed 1483.
•If you selected PPP, the screen allows you to choose PPPoE or None as the Underlying Encapsulation.
•If you choose None, the PPP Mode offers the choice of VC Multiplexed or LLC SNAP.
If you are using PPP, when you select Encapsulation Options, the Datalink (PPP/MP) Options screen appears. (RFC1483 does not require these options and does not offer the menu selection.)
