Tektronix 740L manual Landscape orientation, Center images, Replicate images, Image size

Advanced Print Features 2

Landscape orientation

■Prints the image horizontally (landscape) on the page. Leave this box unchecked to print the image vertically (portrait) on the page.

■Refer to the Stylized representation of the page, in the lower left corner of the dialog box, to see how your selection will look when printed.

Center images

■Centers the image in the page’s image area.

■If this box is not checked, the lower left corner of the image is aligned with the lower left corner of the printable area of the page.

■If the Center images box is checked and the Replicate images box is checked, the set of replicated images are centered in the image area of the page.

Replicate images

■Fills the page’s image area with as many copies of the image as will fit.

■The size of each replicated image is determined by the setting in the Scale text box.

■If the size of each replicated image (shown as black rectangles in the stylized representation of the page) is too small to display, the total image area of the printed page is shown as a single gray rectangle.

Image size

■Reflects the dimensions, in inches or millimeters, of the image.

■If the value in the Scale box is out-of-range, the image dimensions are displayed with question marks.

Advanced Features and Troubleshooting Manual 53