Avery ALS 230 manual Ledg

Operators Manual

ALS 230

Command	Description	Range
#!MDIRnnnn	Motor direction	0000	Right --- >
		0001	Left < ---
#!MLABnnnn	Missing label error	0000	NONE
		0001	Warning
		0002	Error 1
		0003	Error 2
#!PDT nnnn	Print dwell time	0001	– 1000 ms
		0000 printer off
#!PHT nnnn	Printer hold time	0001	– 7500 ms
#!POS_nnn	Labelling position	0001	– 9999 * 0.1 mm
#!PRDLnnnn	Product length	0005	– 4000 mm
#!P_S_nnnn	Polarity product sensor	0000	LEDG
		0001 TEDG
#!RAMPnnnn	Acceleration Ramp	0000 NORM
		0001 FAST
#!SLEWnnnn	Slew speed	0000	= FAST
		0001	= SLOW
#!STADnnnn	Start delay	0001	- 9999 ms
#!STODnnnn	Stop position	0080	- 9999 * 0.1 mm
#!VELOnnnn	Speed	0020	- 0300 * 0.1m/min
#!SAVEnnnn	Store in data bank	0001	- 0009
#!LOADnnnn	Load data bank	0001	- 0009

The following described commands do not have parameter values. With these commands the host can monitor and control the machine.

#!CLRC	Set label counter to 0
#!CLRE	Clear error message
#!CLRW	Clear warning
#!ERRF	The machine sends an error status to the monitoring computer. The message
	ERR8___4__1_<04H> means, error 8, 4 and 1 have occurred.
#!WARF	The machine sends a warning status to the monitoring computer. The message
	WARF7______0 means: The warnings 7 and 0 have occurred.
#!LABC	The machine sends the number of dispensed labels e.g. LABC0000008359 back
#!SP__	The machine is set to off. The product sensor is disabled and labelling will
	therefore be stopped.
Release 11/05	Page 53	Serial interface