American Power Conversion PD150L6F, PD150G6F manual FTP and SCP

Communication Configuration: How to Access a Network Management Interface on a Configured InfraStruXure PDU

FTP and SCP

You can use FTP (enabled by default) or Secure CoPy (SCP) to transfer new firmware to the InfraStruXure PDU, or to access a copy of the InfraStruXure PDU’s event logs. SCP provides the higher security of encrypted data transmission and is enabled automatically when you enable SSH.

If you enable SSL and SSH for their high-security authentication and encryption, disable FTP. Allowing file transfer to the InfraStruXure PDU through FTP compromises the high security you implement by choosing SSL and SSH. To disable

Note FTP, you must be an Administrator; use the FTP Server option of the Network menu.

To access the InfraStruXure PDU through FTP or SCP, the default user name and password are apc and apc for an Administrator, or device and apc for a Device Manager. In the command line, use the IP address of the unit.

	See the InfraStruXure Power Distribution Unit’s online Network Management User’s
	Guide to use FTP or SCP to retrieve log files from the InfraStruXure PDU or to transfer
See also	firmware files to the InfraStruXure PDU.

46 150kW InfraStruXure PDU—Operation and Configuration