American Power Conversion PD150G6F, PD150L6F manual Alarm Relay Map

PDU Display Interface: Contacts Screen

Alarm Relay Map	Configure the relay outputs, using
		Alarm Map: 01 of 04
	the Alarm Relay Map. Each
		[Vo, By, C4]
	Alarm Map corresponds to a relay	Map: Input Voltage
	output. For example, Alarm Map	Apply Now
	01of04 corresponds to the first of four relay outputs. The second line,
	in brackets [ ], lists the items that you have selected to map to the
	selected relay. The third line allows you to select the alarms to which
	you want to map the relay:

•Any Load (L)—Maps to over- or under-current alarms for circuit breaker panels and branch circuits.

•Overload (O)—Maps to over-current alarms for circuit breaker panels, branch circuits, and SYSGND.

•Input Voltage (Vi)—Maps to any input voltage alarm.

•Output Voltage (Vo)—Maps to any output voltage alarm.

•PDU in Bypass (By)—Not used on this model PDU.

•Any Breaker (Br)—Not used on this PDU.

•Contacts 1–4(C1,C2,C3,C4)—Maps to the input contact alarms.

Before exiting the screen, to save your changes, select the Apply Now option on the bottom line of the screen. You will then be asked to confirm your changes.

150kW InfraStruXure PDU—Operation and Configuration 19