How to Add a Sub-Feed Output Circuit Breaker to the PDU and Connect a Sub-Feed Power Cable
Overview
As an option, you can add 150- or 225-amp sub-feed output circuit breakers () to the two (2) mounting bracket positions provided on your 150kW InfraStruXure PDU. These circuit breakers offer a means for distributing higher blocks of power to other equipment. If your PDU has already been configured with a subfeed breaker(s), refer to “How to connect the sub-feed cable to the circuit breaker” on page 56. To install a new circuit breaker, follow all of the instructions in this section.
The PDU must be powered down before adding a subfeed. For instructions on ensuring total power off, refer to “How to Ensure Total Power Off” on page 33 of this
Caution manual.
54 | 150kW InfraStruXure PDU—Operation and Configuration |
