Wacom DTZ-1200W, 12WX manual

Page 17
For Macintosh systems, a Cintiq color profile will be added to your computer’s color management system during the tablet software driver installation process. To activate this color profile for use with Cintiq, you may need to select the Cintiq 12WX profile in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation.

For Macintosh systems, a Cintiq color profile will be added to your computer’s color management system during the tablet software driver installation process. To activate this color profile for use with Cintiq, you may need to select the Cintiq 12WX profile in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation.

•As necessary, configure the display control panel settings for the proper size and color resolution. The maximum (native) resolution of the Cintiq 12WX is 1280 x 800 pixels with 24 bit color (8 bits per color). The display size and color resolution may be constrained by the capabilities of your video card. See the video card manufacturer’s documentation for details.

For Windows: If you are using Cintiq as a secondary display, you may first need to enable Cintiq in your Display Properties control panel.

•If using analog (VGA) mode, you may want to fine-tune the display. See Adjusting clock and phase (VGA only) on page 35 and Adjusting the display beginning on page 30.

•After the display portion of Cintiq is working to your satisfaction, move on to Step 2: pen tablet installation to install the pen tablet portion of Cintiq. For troubleshooting tips, see page 36.

Notes:

If your graphics card does not support the native resolution of 1280 x 800 pixels, check with your graphics card manufacturer for a driver update.

Each Cintiq LCD panel is produced under stringent quality standards. Production techniques cannot guarantee an absolutely perfect TFT display, and some panels may exhibit a certain number of pixels that show an incorrect color. See the specifications on page 56 for more information.

If an image has fine striping (such as screen stripes), it may appear to flicker or display a moiré pattern.

Do not apply excessive pressure on the display surface, it may cause the appearance of a moiré or pooling pattern. If this occurs, use less pressure on the display screen when working with the pen.

When a still image is displayed for a long period of time, an after-image may remain for a short time. To prevent this, Wacom recommends using a screen saver or other power management feature.

Important: To extend the life of the backlight, set your computer’s power management to turn off the display when it is not in use for extended periods of time.

Installation

Page 15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W Wacom Cintiq 12WX INTRODUCTION AND OVERVIEW PHYSICAL LOCATION PRECAUTIONSENVIRONMENT Temperature and HumidityThe Cintiq pen display has a backlight which contains mercury Hg USAGEHANDLING CAUTION Do not excessively bend or crimp the cabling Installation CONTENTSYour new Cintiq Working with your CintiqAppendix TroubleshootingYOUR NEW CINTIQ PACKAGE CONTENTSFRONT VIEW CINTIQ PEN DISPLAY COMPONENTSPower switch REAR VIEWRotation pivot Kensington security slotPower plug CONVERTER UNITUSB-A connector DVI-I video connectorThere are two primary steps to the installation process INSTALLATIONStep 1 display installation Step 2 pen tablet installation Follow ALL installation instructions carefullySTEP 1 DISPLAY INSTALLATION DISPLAY CABLING DIAGRAM Next, turn on your computer For Macintosh systems, a Cintiq color profile will be added to your computer’s color management system during the tablet software driver installation process. To activate this color profile for use with Cintiq, you may need to select the Cintiq 12WX profile in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation PEN TABLET USB CABLING DIAGRAM STEP 2 PEN TABLET INSTALLATIONUSB CABLE INSTALLATION SOFTWARE INSTALLATION WORKING WITH YOUR CINTIQ USING THE GRIP PENBASIC PEN OPERATIONS Using the side switch The pen is equipped with a DuoSwitch. This switch has two programmable functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch whenever the pen tip is within 5 mm 0.2 inch of the tablet surface you do not need to touch the pen tip to the tablet in order to use the switch. By default, the upper switch is set to DOUBLE CLICK and the lower switch is set to RIGHT CLICK TABLET CONTROLS Tips USING THE EXPRESSKEYSUSING THE TOUCH STRIPS SETTING UP YOUR WORK AREA ADJUSTING DISPLAY INCLINE ROTATING THE TABLET ATTACHING THE ACCESSORY FEETLEARNING MORE ABOUT CINTIQ CUSTOMIZINGOPENING THE CONTROL PANEL Software User’s Manual CUSTOMIZATION BASICSCloses the control panel CALIBRATING CINTIQ POWER SAVING ADJUSTING THE DISPLAYFACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION 1. MENU button ON SCREEN DISPLAY OSD SETTINGSENTER button 2. Selection buttonsThe basic process for working with the OSD is as follows Main Control ResetOSD Control LanguageHORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option ADJUSTING CLOCK AND PHASE VGA ONLY 1. If the Cintiq power LED does not light, check the following TROUBLESHOOTINGTESTING CINTIQ 3. Verify that the tablet and Grip Pen are working 2. If there is no displayTESTING THE TOUCH STRIPS TESTING CONTROLS AND INPUT TOOLSTESTING THE EXPRESSKEYS Airbrush TESTING A PENGENERAL DISPLAY PROBLEMS DISPLAY TROUBLESHOOTINGPage VGA PROBLEMS Testing Cintiq on page PEN TABLET TROUBLESHOOTINGGENERAL PROBLEMS FEEL The pen side switch does Delete the pen tablet preferences as follows See Technical support options on page WINDOWS-SPECIFIC PROBLEMSMACINTOSH-SPECIFIC PROBLEMS TECHNICAL SUPPORT OPTIONS USA, Canada, Central and South America OBTAINING DRIVER DOWNLOADSEurope, Middle East and Africa JapanCARING FOR CINTIQ CLEANINGAPPENDIX To insert a new nib REPLACING THE PEN TIPTo remove the old nib Removal from the fixture USING A MOUNTING FIXTUREAttaching to a fixture PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL Macintosh UNINSTALLING CINTIQWindows DISPLAY PRODUCT SPECIFICATIONSCINTIQ 12WX MODEL DTZ-1200W GENERAL SPECIFICATIONS PEN TABLET POWER ADAPTERGRIP PEN MODEL ZP-501E 148 x 112 x 27 mm 5.83 x 4.41 x 1.06 in, excluding foot padsACCESSORIES ORDERING PARTS AND ACCESSORIES FEDERAL COMMUNICATIONS COMMISSION FCC NOTICE RADIO AND TELEVISION INTERFERENCEIndustry Canada, Class B INDUSTRY CANADA CANADA ONLYCE DECLARATION WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST LIMITED WARRANTY WARRANTYIn North and South America contact WARRANTY SERVICE IN THE U.S.A. AND CANADAWARRANTY SERVICE OUTSIDE OF THE U.S.A. AND CANADA This page intentionally left blank Wacom Europe GmbH Wacom Technology CorporationWacom China Corporation TelephoneUE-0387 Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W
Top Page Image Contents