Wacom 12WX, DTZ-1200W manual The basic process for working with the OSD is as follows

Page 34

The basic process for working with the OSD is as follows:

The basic process for working with the OSD is as follows:

•Press the MENU button to open the OSD main menu.

•Press the up or down buttons to toggle between the main menu icons. Then press the ENTER button to choose the highlighted icon.

The Main Control icon displays a DVI or VGA identiﬁer, depending on which video interface is currently in use.

•Press the up or down buttons to toggle between menu options. Press the ENTER button to choose the highlighted option.

Note that some options, such as POSITION, are not available when in DVI mode.

•Press the up or down buttons to select a setting for adjustment. Press the ENTER button to choose the highlighted setting.

Note that some settings may not be available when in DVI mode.

•Use the up or down buttons to increase or decrease the setting value.

•Press the MENU button to accept your changes.

Note: After changing a setting, the OSD menu will automatically close after a few moments of inactivity. You can also continue to press MENU in order to back out of the OSD menu. All settings are automatically saved when the OSD menu closes. If you make changes to the display appearance and cannot return to the original settings, go to the RESET menu and select the FACTORY RESET option to return Cintiq to its original factory defaults.

See the following pages for details about the OSD menu options.

Customizing

Page 32

Image 34

Contents Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W Wacom Cintiq 12WX INTRODUCTION AND OVERVIEW ENVIRONMENT PRECAUTIONSPHYSICAL LOCATION Temperature and HumidityHANDLING USAGEThe Cintiq pen display has a backlight which contains mercury Hg CAUTION Do not excessively bend or crimp the cabling Your new Cintiq CONTENTSInstallation Working with your CintiqTroubleshooting AppendixPACKAGE CONTENTS YOUR NEW CINTIQCINTIQ PEN DISPLAY COMPONENTS FRONT VIEWRotation pivot REAR VIEWPower switch Kensington security slotUSB-A connector CONVERTER UNITPower plug DVI-I video connectorStep 1 display installation Step 2 pen tablet installation INSTALLATIONThere are two primary steps to the installation process Follow ALL installation instructions carefullySTEP 1 DISPLAY INSTALLATION DISPLAY CABLING DIAGRAM Next, turn on your computer For Macintosh systems, a Cintiq color proﬁle will be added to your computer’s color management system during the tablet software driver installation process. To activate this color proﬁle for use with Cintiq, you may need to select the Cintiq 12WX proﬁle in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation USB CABLE INSTALLATION STEP 2 PEN TABLET INSTALLATIONPEN TABLET USB CABLING DIAGRAM SOFTWARE INSTALLATION USING THE GRIP PEN WORKING WITH YOUR CINTIQBASIC PEN OPERATIONS Using the side switch The pen is equipped with a DuoSwitch. This switch has two programmable functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch whenever the pen tip is within 5 mm 0.2 inch of the tablet surface you do not need to touch the pen tip to the tablet in order to use the switch. By default, the upper switch is set to DOUBLE CLICK and the lower switch is set to RIGHT CLICK TABLET CONTROLS USING THE EXPRESSKEYS TipsUSING THE TOUCH STRIPS SETTING UP YOUR WORK AREA ADJUSTING DISPLAY INCLINE ATTACHING THE ACCESSORY FEET ROTATING THE TABLETOPENING THE CONTROL PANEL CUSTOMIZINGLEARNING MORE ABOUT CINTIQ Closes the control panel CUSTOMIZATION BASICSSoftware User’s Manual CALIBRATING CINTIQ FACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION ADJUSTING THE DISPLAYPOWER SAVING ENTER button ON SCREEN DISPLAY OSD SETTINGS1. MENU button 2. Selection buttonsThe basic process for working with the OSD is as follows OSD Control ResetMain Control LanguageHORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option ADJUSTING CLOCK AND PHASE VGA ONLY TESTING CINTIQ TROUBLESHOOTING1. If the Cintiq power LED does not light, check the following 2. If there is no display 3. Verify that the tablet and Grip Pen are workingTESTING THE EXPRESSKEYS TESTING CONTROLS AND INPUT TOOLSTESTING THE TOUCH STRIPS TESTING A PEN AirbrushDISPLAY TROUBLESHOOTING GENERAL DISPLAY PROBLEMSPage VGA PROBLEMS GENERAL PROBLEMS PEN TABLET TROUBLESHOOTINGTesting Cintiq on page FEEL The pen side switch does Delete the pen tablet preferences as follows MACINTOSH-SPECIFIC PROBLEMS WINDOWS-SPECIFIC PROBLEMSSee Technical support options on page TECHNICAL SUPPORT OPTIONS Europe, Middle East and Africa OBTAINING DRIVER DOWNLOADSUSA, Canada, Central and South America JapanAPPENDIX CLEANINGCARING FOR CINTIQ To remove the old nib REPLACING THE PEN TIPTo insert a new nib Attaching to a ﬁxture USING A MOUNTING FIXTURERemoval from the ﬁxture PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL Windows UNINSTALLING CINTIQMacintosh CINTIQ 12WX MODEL DTZ-1200W GENERAL SPECIFICATIONS PRODUCT SPECIFICATIONSDISPLAY GRIP PEN MODEL ZP-501E POWER ADAPTERPEN TABLET 148 x 112 x 27 mm 5.83 x 4.41 x 1.06 in, excluding foot padsACCESSORIES ORDERING PARTS AND ACCESSORIES RADIO AND TELEVISION INTERFERENCE FEDERAL COMMUNICATIONS COMMISSION FCC NOTICECE DECLARATION INDUSTRY CANADA CANADA ONLYIndustry Canada, Class B WARRANTY WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST LIMITED WARRANTYWARRANTY SERVICE OUTSIDE OF THE U.S.A. AND CANADA WARRANTY SERVICE IN THE U.S.A. AND CANADAIn North and South America contact This page intentionally left blank Wacom China Corporation Wacom Technology CorporationWacom Europe GmbH TelephoneInstallation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W UE-0387