Wacom 12WX, DTZ-1200W manual

Page 36

•HORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option.

POSITION menu options (VGA only) are as follows:

•VERTICAL. Changes the vertical position of the image. To automatically adjust, use the AUTO ADJUST option.

•HORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option.

COLOR menu options are as follows:

•TEMPERATURE. Enables you to adjust the pen display color temperature. Provides color temperature settings for 6500˚ and 9300˚ Kelvin, as well as DIRECT and CUSTOM options.

•DIRECT displays the colors directly from the video card without any adjustment.

•RED, GREEN, BLUE. After selecting the CUSTOM color option, you can independently adjust the RED, GREEN, and BLUE display colors.

Note: Manual changes made to the color settings will invalidate the Cintiq color proﬁle.

OSD Control menu options are as follows:

•VERTICAL. Adjusts the vertical position of the OSD menu window.

•HORIZONTAL. Adjusts the horizontal position of the OSD menu window.

•TRANSPARENCY. Changes the opaqueness of the OSD menu background.

•TIME OUT. Use this option to set the amount of time the OSD menu will remain displayed with no user input.

Customizing

Page 34

Image 36

Contents Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W Wacom Cintiq 12WX INTRODUCTION AND OVERVIEW PRECAUTIONS PHYSICAL LOCATIONENVIRONMENT Temperature and HumidityUSAGE HANDLINGThe Cintiq pen display has a backlight which contains mercury Hg CAUTION Do not excessively bend or crimp the cabling CONTENTS InstallationYour new Cintiq Working with your CintiqTroubleshooting AppendixPACKAGE CONTENTS YOUR NEW CINTIQCINTIQ PEN DISPLAY COMPONENTS FRONT VIEWREAR VIEW Power switchRotation pivot Kensington security slotCONVERTER UNIT Power plugUSB-A connector DVI-I video connectorINSTALLATION There are two primary steps to the installation processStep 1 display installation Step 2 pen tablet installation Follow ALL installation instructions carefullySTEP 1 DISPLAY INSTALLATION DISPLAY CABLING DIAGRAM Next, turn on your computer For Macintosh systems, a Cintiq color proﬁle will be added to your computer’s color management system during the tablet software driver installation process. To activate this color proﬁle for use with Cintiq, you may need to select the Cintiq 12WX proﬁle in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation STEP 2 PEN TABLET INSTALLATION USB CABLE INSTALLATIONPEN TABLET USB CABLING DIAGRAM SOFTWARE INSTALLATION USING THE GRIP PEN WORKING WITH YOUR CINTIQBASIC PEN OPERATIONS Using the side switch The pen is equipped with a DuoSwitch. This switch has two programmable functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch whenever the pen tip is within 5 mm 0.2 inch of the tablet surface you do not need to touch the pen tip to the tablet in order to use the switch. By default, the upper switch is set to DOUBLE CLICK and the lower switch is set to RIGHT CLICK TABLET CONTROLS USING THE EXPRESSKEYS TipsUSING THE TOUCH STRIPS SETTING UP YOUR WORK AREA ADJUSTING DISPLAY INCLINE ATTACHING THE ACCESSORY FEET ROTATING THE TABLETCUSTOMIZING OPENING THE CONTROL PANELLEARNING MORE ABOUT CINTIQ CUSTOMIZATION BASICS Closes the control panelSoftware User’s Manual CALIBRATING CINTIQ ADJUSTING THE DISPLAY FACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATIONPOWER SAVING ON SCREEN DISPLAY OSD SETTINGS 1. MENU buttonENTER button 2. Selection buttonsThe basic process for working with the OSD is as follows Reset Main ControlOSD Control LanguageHORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option ADJUSTING CLOCK AND PHASE VGA ONLY TROUBLESHOOTING TESTING CINTIQ1. If the Cintiq power LED does not light, check the following 2. If there is no display 3. Verify that the tablet and Grip Pen are workingTESTING CONTROLS AND INPUT TOOLS TESTING THE EXPRESSKEYSTESTING THE TOUCH STRIPS TESTING A PEN AirbrushDISPLAY TROUBLESHOOTING GENERAL DISPLAY PROBLEMSPage VGA PROBLEMS PEN TABLET TROUBLESHOOTING GENERAL PROBLEMSTesting Cintiq on page FEEL The pen side switch does Delete the pen tablet preferences as follows WINDOWS-SPECIFIC PROBLEMS MACINTOSH-SPECIFIC PROBLEMSSee Technical support options on page TECHNICAL SUPPORT OPTIONS OBTAINING DRIVER DOWNLOADS USA, Canada, Central and South AmericaEurope, Middle East and Africa JapanCLEANING APPENDIXCARING FOR CINTIQ REPLACING THE PEN TIP To remove the old nibTo insert a new nib USING A MOUNTING FIXTURE Attaching to a ﬁxtureRemoval from the ﬁxture PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL UNINSTALLING CINTIQ WindowsMacintosh PRODUCT SPECIFICATIONS CINTIQ 12WX MODEL DTZ-1200W GENERAL SPECIFICATIONSDISPLAY POWER ADAPTER PEN TABLETGRIP PEN MODEL ZP-501E 148 x 112 x 27 mm 5.83 x 4.41 x 1.06 in, excluding foot padsACCESSORIES ORDERING PARTS AND ACCESSORIES RADIO AND TELEVISION INTERFERENCE FEDERAL COMMUNICATIONS COMMISSION FCC NOTICEINDUSTRY CANADA CANADA ONLY CE DECLARATIONIndustry Canada, Class B WARRANTY WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST LIMITED WARRANTYWARRANTY SERVICE IN THE U.S.A. AND CANADA WARRANTY SERVICE OUTSIDE OF THE U.S.A. AND CANADAIn North and South America contact This page intentionally left blank Wacom Technology Corporation Wacom Europe GmbHWacom China Corporation TelephoneInstallation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W UE-0387