Wacom DTZ-1200W, 12WX manual Testing A Pen, Airbrush

Page 41
TESTING A PEN

TESTING A PEN

1.While observing the POINTING DEVICE INFO column, bring your pen within 5 mm (0.2 inch) of the display screen. A value for PROXIMITY, the DEVICE NAME, DEVICE TYPE, and a DEVICE S/N (serial number) should be displayed. If you have more than one Cintiq unit connected to your system, be sure to select the unit for which you are testing a pen in the TABLET INFO column.

2.Move your tool along the tablet surface. The X and Y DATA values should change to reflect the tool position.

3.Test your pen switches. The Cintiq status LED should light blue each time you click with the tool tip, press the side switch, or press the tool’s eraser to the display screen.

•Press on the display screen surface with the tool tip – the SWITCHES state and PRESSURE value should change. (PRESSURE should change from approximately 0% with no pressure applied to approximately 100% when full pressure is applied.)

•Next, press the side switch without pressing the tip to the tablet – the SWITCHES state should change. (For the Grip Pen, do this for both positions of the DuoSwitch.)

Pen

Tip = 1, DuoSwitch (lower position) = 2,

 

DuoSwitch (upper position) = 3, Eraser = 1

 

 

Airbrush

Tip = 1, Side Switch = 2, Eraser = 1

•Press the tool’s eraser to the display screen – the SWITCHES state and PRESSURE value should change. (PRESSURE should change from approximately 0% with no pressure applied to approximately 100% when full pressure is applied.)

•For the optional Airbrush, move the fingerwheel forward – the WHEEL value should decrease to a value of approximately 0 when the fingerwheel is all the way forward. Move the fingerwheel backward – the WHEEL value should increase to approximately 1000 when the fingerwheel is all the way back.

4.Test tilt for the x-axis by moving the pen from a vertical position toward the right; the X TILT value should change from approximately 0 to +60. Now move the tool to the left of vertical; the X TILT value should change from approximately 0 to -60.

5.Test the tilt for the y-axis by moving the pen from a vertical position toward the bottom of the tablet; the Y TILT value should change from approximately 0 to +60. Now move the tool toward the top of the tablet; the Y TILT value should change from approximately 0 to +60.

6.For the optional 6D Art Pen, test the rotation feature by placing the pen tip on the display screen surface and slowing rotating the pen on its axis. The ROTATION value should change as you rotate the pen.

7.When you are done, click on the CLOSE button to exit the dialog box.

Troubleshooting

Page 39

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W Wacom Cintiq 12WX INTRODUCTION AND OVERVIEW PHYSICAL LOCATION PRECAUTIONSENVIRONMENT Temperature and HumidityThe Cintiq pen display has a backlight which contains mercury Hg USAGEHANDLING CAUTION Do not excessively bend or crimp the cabling Installation CONTENTSYour new Cintiq Working with your CintiqAppendix TroubleshootingYOUR NEW CINTIQ PACKAGE CONTENTSFRONT VIEW CINTIQ PEN DISPLAY COMPONENTSPower switch REAR VIEWRotation pivot Kensington security slotPower plug CONVERTER UNITUSB-A connector DVI-I video connectorThere are two primary steps to the installation process INSTALLATIONStep 1 display installation Step 2 pen tablet installation Follow ALL installation instructions carefullySTEP 1 DISPLAY INSTALLATION DISPLAY CABLING DIAGRAM Next, turn on your computer For Macintosh systems, a Cintiq color profile will be added to your computer’s color management system during the tablet software driver installation process. To activate this color profile for use with Cintiq, you may need to select the Cintiq 12WX profile in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation PEN TABLET USB CABLING DIAGRAM STEP 2 PEN TABLET INSTALLATIONUSB CABLE INSTALLATION SOFTWARE INSTALLATION WORKING WITH YOUR CINTIQ USING THE GRIP PENBASIC PEN OPERATIONS Using the side switch The pen is equipped with a DuoSwitch. This switch has two programmable functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch whenever the pen tip is within 5 mm 0.2 inch of the tablet surface you do not need to touch the pen tip to the tablet in order to use the switch. By default, the upper switch is set to DOUBLE CLICK and the lower switch is set to RIGHT CLICK TABLET CONTROLS Tips USING THE EXPRESSKEYSUSING THE TOUCH STRIPS SETTING UP YOUR WORK AREA ADJUSTING DISPLAY INCLINE ROTATING THE TABLET ATTACHING THE ACCESSORY FEETLEARNING MORE ABOUT CINTIQ CUSTOMIZINGOPENING THE CONTROL PANEL Software User’s Manual CUSTOMIZATION BASICSCloses the control panel CALIBRATING CINTIQ POWER SAVING ADJUSTING THE DISPLAYFACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION 1. MENU button ON SCREEN DISPLAY OSD SETTINGSENTER button 2. Selection buttonsThe basic process for working with the OSD is as follows Main Control ResetOSD Control LanguageHORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option ADJUSTING CLOCK AND PHASE VGA ONLY 1. If the Cintiq power LED does not light, check the following TROUBLESHOOTINGTESTING CINTIQ 3. Verify that the tablet and Grip Pen are working 2. If there is no displayTESTING THE TOUCH STRIPS TESTING CONTROLS AND INPUT TOOLSTESTING THE EXPRESSKEYS Airbrush TESTING A PENGENERAL DISPLAY PROBLEMS DISPLAY TROUBLESHOOTINGPage VGA PROBLEMS Testing Cintiq on page PEN TABLET TROUBLESHOOTINGGENERAL PROBLEMS FEEL The pen side switch does Delete the pen tablet preferences as follows See Technical support options on page WINDOWS-SPECIFIC PROBLEMSMACINTOSH-SPECIFIC PROBLEMS TECHNICAL SUPPORT OPTIONS USA, Canada, Central and South America OBTAINING DRIVER DOWNLOADSEurope, Middle East and Africa JapanCARING FOR CINTIQ CLEANINGAPPENDIX To insert a new nib REPLACING THE PEN TIPTo remove the old nib Removal from the fixture USING A MOUNTING FIXTUREAttaching to a fixture PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL Macintosh UNINSTALLING CINTIQWindows DISPLAY PRODUCT SPECIFICATIONSCINTIQ 12WX MODEL DTZ-1200W GENERAL SPECIFICATIONS PEN TABLET POWER ADAPTERGRIP PEN MODEL ZP-501E 148 x 112 x 27 mm 5.83 x 4.41 x 1.06 in, excluding foot padsACCESSORIES ORDERING PARTS AND ACCESSORIES FEDERAL COMMUNICATIONS COMMISSION FCC NOTICE RADIO AND TELEVISION INTERFERENCEIndustry Canada, Class B INDUSTRY CANADA CANADA ONLYCE DECLARATION WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST LIMITED WARRANTY WARRANTYIn North and South America contact WARRANTY SERVICE IN THE U.S.A. AND CANADAWARRANTY SERVICE OUTSIDE OF THE U.S.A. AND CANADA This page intentionally left blank Wacom Europe GmbH Wacom Technology CorporationWacom China Corporation TelephoneUE-0387 Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W
Top Page Image Contents