Wacom 12WX, DTZ-1200W manual Troubleshooting, Testing Cintiq

Page 38

TROUBLESHOOTING

Most of the time your pen display tablet will work ﬂawlessly. But if you are having trouble, Wacom recommends you do the following:

1.If the Wacom tablet driver failed to load properly, ﬁrst perform the recommended action in any error message that may appear on your screen. If that does not solve the problem, continue with the troubleshooting procedures in this chapter.

2.If Cintiq does not function properly, refer to the troubleshooting sections on the following pages. See also Display troubleshooting on page 40, or look in the Pen tablet troubleshooting on page 43. Your problem may be described there and you can try the solution offered.

3.Open the Wacom pen display Read Me ﬁle for late-breaking information.

4.If you are having a compatibility conﬂict between Cintiq and a new hardware or software product, see Obtaining driver downloads on page 49 for information on downloading an updated software driver. Wacom periodically updates the software driver to maintain compatibility with new products.

5.Check the FAQs (Frequently Asked Questions) on the Wacom web site for your region.

6.If you have tried the suggestions in this manual and still cannot resolve the problem, then contact Wacom for Technical Support. See the Read Me ﬁle for information on where to obtain support for your region.

TESTING CINTIQ

1.If the Cintiq power LED does not light, check the following:

•First verify that the green light on the power adapter is on. If the light is not on, check that the power cable is properly connected to the power adapter and to an active AC outlet.

•Check that the power adapter cable is securely connected to the Cintiq converter unit.

•Check also that the Cintiq integrated cable is properly connected to the converter unit and that the Cintiq power switch is turned on. (To unplug the cable, squeeze the connector side clips to release the connector.) The Cintiq power LED will glow orange or blue whenever Cintiq is on.

Important: Use only the AC adapter that came with your pen display. Other adapters may damage your product.

Troubleshooting

Page 36

Image 38

Contents Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W Wacom Cintiq 12WX INTRODUCTION AND OVERVIEW ENVIRONMENT PRECAUTIONSPHYSICAL LOCATION Temperature and HumidityThe Cintiq pen display has a backlight which contains mercury Hg USAGEHANDLING CAUTION Do not excessively bend or crimp the cabling Your new Cintiq CONTENTSInstallation Working with your CintiqTroubleshooting AppendixPACKAGE CONTENTS YOUR NEW CINTIQCINTIQ PEN DISPLAY COMPONENTS FRONT VIEWRotation pivot REAR VIEWPower switch Kensington security slotUSB-A connector CONVERTER UNITPower plug DVI-I video connectorStep 1 display installation Step 2 pen tablet installation INSTALLATIONThere are two primary steps to the installation process Follow ALL installation instructions carefullySTEP 1 DISPLAY INSTALLATION DISPLAY CABLING DIAGRAM Next, turn on your computer For Macintosh systems, a Cintiq color proﬁle will be added to your computer’s color management system during the tablet software driver installation process. To activate this color proﬁle for use with Cintiq, you may need to select the Cintiq 12WX proﬁle in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation PEN TABLET USB CABLING DIAGRAM STEP 2 PEN TABLET INSTALLATIONUSB CABLE INSTALLATION SOFTWARE INSTALLATION USING THE GRIP PEN WORKING WITH YOUR CINTIQBASIC PEN OPERATIONS Using the side switch The pen is equipped with a DuoSwitch. This switch has two programmable functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch whenever the pen tip is within 5 mm 0.2 inch of the tablet surface you do not need to touch the pen tip to the tablet in order to use the switch. By default, the upper switch is set to DOUBLE CLICK and the lower switch is set to RIGHT CLICK TABLET CONTROLS USING THE EXPRESSKEYS TipsUSING THE TOUCH STRIPS SETTING UP YOUR WORK AREA ADJUSTING DISPLAY INCLINE ATTACHING THE ACCESSORY FEET ROTATING THE TABLETLEARNING MORE ABOUT CINTIQ CUSTOMIZINGOPENING THE CONTROL PANEL Software User’s Manual CUSTOMIZATION BASICSCloses the control panel CALIBRATING CINTIQ POWER SAVING ADJUSTING THE DISPLAYFACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION ENTER button ON SCREEN DISPLAY OSD SETTINGS1. MENU button 2. Selection buttonsThe basic process for working with the OSD is as follows OSD Control ResetMain Control LanguageHORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option ADJUSTING CLOCK AND PHASE VGA ONLY 1. If the Cintiq power LED does not light, check the following TROUBLESHOOTINGTESTING CINTIQ 2. If there is no display 3. Verify that the tablet and Grip Pen are workingTESTING THE TOUCH STRIPS TESTING CONTROLS AND INPUT TOOLSTESTING THE EXPRESSKEYS TESTING A PEN AirbrushDISPLAY TROUBLESHOOTING GENERAL DISPLAY PROBLEMSPage VGA PROBLEMS Testing Cintiq on page PEN TABLET TROUBLESHOOTINGGENERAL PROBLEMS FEEL The pen side switch does Delete the pen tablet preferences as follows See Technical support options on page WINDOWS-SPECIFIC PROBLEMSMACINTOSH-SPECIFIC PROBLEMS TECHNICAL SUPPORT OPTIONS Europe, Middle East and Africa OBTAINING DRIVER DOWNLOADSUSA, Canada, Central and South America JapanCARING FOR CINTIQ CLEANINGAPPENDIX To insert a new nib REPLACING THE PEN TIPTo remove the old nib Removal from the ﬁxture USING A MOUNTING FIXTUREAttaching to a ﬁxture PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL Macintosh UNINSTALLING CINTIQWindows DISPLAY PRODUCT SPECIFICATIONSCINTIQ 12WX MODEL DTZ-1200W GENERAL SPECIFICATIONS GRIP PEN MODEL ZP-501E POWER ADAPTERPEN TABLET 148 x 112 x 27 mm 5.83 x 4.41 x 1.06 in, excluding foot padsACCESSORIES ORDERING PARTS AND ACCESSORIES RADIO AND TELEVISION INTERFERENCE FEDERAL COMMUNICATIONS COMMISSION FCC NOTICEIndustry Canada, Class B INDUSTRY CANADA CANADA ONLYCE DECLARATION WARRANTY WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST LIMITED WARRANTYIn North and South America contact WARRANTY SERVICE IN THE U.S.A. AND CANADAWARRANTY SERVICE OUTSIDE OF THE U.S.A. AND CANADA This page intentionally left blank Wacom China Corporation Wacom Technology CorporationWacom Europe GmbH TelephoneInstallation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W UE-0387