Wacom DTZ-1200W, 12WX manual Pen Tablet, Power Adapter, GRIP PEN MODEL ZP-501E, Converter Unit

Page 59

PEN TABLET

Reading technology	Electromagnetic resonance technology
Active area	261.1 x 163.2 mm (10.3 x 6.4 in)
Resolution	0.005 mm/point (5080 lpi)
Accuracy	±0.5 mm (±0.02 in), average
Tilt range (all pens)	±60 degrees
Reading height	5 mm (0.2 in)
Maximum report rate	133 points/sec.
ExpressKeys stroke	1 mm (0.04 in), approximately
Touch Strips	52 mm (2.0 in) x 12 mm (0.47 in)
Pressure levels	1024 levels
Communication interface	USB
CONVERTER UNIT
Dimensions (W x D x H)	148 x 112 x 27 mm (5.83 x 4.41 x 1.06 in), excluding foot pads
Weight	0.3 kg (0.66 lb)
Video input	DVI or VGA (DVI incl. DDC/CI, DDC-2B, and other standards)
Tablet interface	USB
Output	Proprietary video and USB interface
Input voltage	12VDC
POWER ADAPTER
Input voltage	100 to 240 VAC, 50/60 Hz
Output voltage	12 VDC, 3.3 A
GRIP PEN (MODEL ZP-501E)
Pressure sensitivity	1024 levels (tip and eraser)
Eraser tip travel	1.3 mm (0.05 in), approximately
Dimensions (L x D)	175.0 x 15.0 mm (6.89 x 0.59 in)
Weight	18 g (0.63 oz), approximately
Tip types	Standard nib, Polyacetal (POM), black (3) – for general,

multi-purpose use.

Stroke nib, spring loaded, gray (1) – for a brush-like feeling.

Felt nib, black (1) – provides a higher friction than the other nibs.

Appendix Page 57

Image 59

Contents Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W Wacom Cintiq 12WX INTRODUCTION AND OVERVIEW Temperature and Humidity PRECAUTIONSPHYSICAL LOCATION ENVIRONMENTThe Cintiq pen display has a backlight which contains mercury Hg USAGEHANDLING CAUTION Do not excessively bend or crimp the cabling Working with your Cintiq CONTENTSInstallation Your new CintiqAppendix TroubleshootingYOUR NEW CINTIQ PACKAGE CONTENTSFRONT VIEW CINTIQ PEN DISPLAY COMPONENTSKensington security slot REAR VIEWPower switch Rotation pivotDVI-I video connector CONVERTER UNITPower plug USB-A connectorFollow ALL installation instructions carefully INSTALLATIONThere are two primary steps to the installation process Step 1 display installation Step 2 pen tablet installationSTEP 1 DISPLAY INSTALLATION DISPLAY CABLING DIAGRAM Next, turn on your computer For Macintosh systems, a Cintiq color proﬁle will be added to your computer’s color management system during the tablet software driver installation process. To activate this color proﬁle for use with Cintiq, you may need to select the Cintiq 12WX proﬁle in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation PEN TABLET USB CABLING DIAGRAM STEP 2 PEN TABLET INSTALLATIONUSB CABLE INSTALLATION SOFTWARE INSTALLATION WORKING WITH YOUR CINTIQ USING THE GRIP PENBASIC PEN OPERATIONS Using the side switch The pen is equipped with a DuoSwitch. This switch has two programmable functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch whenever the pen tip is within 5 mm 0.2 inch of the tablet surface you do not need to touch the pen tip to the tablet in order to use the switch. By default, the upper switch is set to DOUBLE CLICK and the lower switch is set to RIGHT CLICK TABLET CONTROLS Tips USING THE EXPRESSKEYSUSING THE TOUCH STRIPS SETTING UP YOUR WORK AREA ADJUSTING DISPLAY INCLINE ROTATING THE TABLET ATTACHING THE ACCESSORY FEETLEARNING MORE ABOUT CINTIQ CUSTOMIZINGOPENING THE CONTROL PANEL Software User’s Manual CUSTOMIZATION BASICSCloses the control panel CALIBRATING CINTIQ POWER SAVING ADJUSTING THE DISPLAYFACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION 2. Selection buttons ON SCREEN DISPLAY OSD SETTINGS1. MENU button ENTER buttonThe basic process for working with the OSD is as follows Language ResetMain Control OSD ControlHORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option ADJUSTING CLOCK AND PHASE VGA ONLY 1. If the Cintiq power LED does not light, check the following TROUBLESHOOTINGTESTING CINTIQ 3. Verify that the tablet and Grip Pen are working 2. If there is no displayTESTING THE TOUCH STRIPS TESTING CONTROLS AND INPUT TOOLSTESTING THE EXPRESSKEYS Airbrush TESTING A PENGENERAL DISPLAY PROBLEMS DISPLAY TROUBLESHOOTINGPage VGA PROBLEMS Testing Cintiq on page PEN TABLET TROUBLESHOOTINGGENERAL PROBLEMS FEEL The pen side switch does Delete the pen tablet preferences as follows See Technical support options on page WINDOWS-SPECIFIC PROBLEMSMACINTOSH-SPECIFIC PROBLEMS TECHNICAL SUPPORT OPTIONS Japan OBTAINING DRIVER DOWNLOADSUSA, Canada, Central and South America Europe, Middle East and AfricaCARING FOR CINTIQ CLEANINGAPPENDIX To insert a new nib REPLACING THE PEN TIPTo remove the old nib Removal from the ﬁxture USING A MOUNTING FIXTUREAttaching to a ﬁxture PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL Macintosh UNINSTALLING CINTIQWindows DISPLAY PRODUCT SPECIFICATIONSCINTIQ 12WX MODEL DTZ-1200W GENERAL SPECIFICATIONS 148 x 112 x 27 mm 5.83 x 4.41 x 1.06 in, excluding foot pads POWER ADAPTERPEN TABLET GRIP PEN MODEL ZP-501EACCESSORIES ORDERING PARTS AND ACCESSORIES FEDERAL COMMUNICATIONS COMMISSION FCC NOTICE RADIO AND TELEVISION INTERFERENCEIndustry Canada, Class B INDUSTRY CANADA CANADA ONLYCE DECLARATION WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST LIMITED WARRANTY WARRANTYIn North and South America contact WARRANTY SERVICE IN THE U.S.A. AND CANADAWARRANTY SERVICE OUTSIDE OF THE U.S.A. AND CANADA This page intentionally left blank Telephone Wacom Technology CorporationWacom Europe GmbH Wacom China CorporationUE-0387 Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W