Wacom DTZ-1200W Usage, Handling, The Cintiq pen display has a backlight which contains mercury Hg

Page 5
USAGE

USAGE

WARNING Only use the converter unit and power adapter that came with Cintiq. If a different type

of converter or power adapter are used, Cintiq will not work properly or may be damaged.

Using a different type of converter or power adapter also has the potential to result in fire. Use of a different converter or power adapter will void your warranty.

HANDLING CAUTION Be sure to use a grounded power source when applying power to Cintiq.

CAUTION Do not connect or disconnect the video or power cables while Cintiq or your computer

are turned on; this may damage the display, converter unit, or computer video card. In this case, Wacom shall have no responsibility to repair or replace the product.

CAUTION This product is for use with a DVI or VGA video card; using an inappropriate video card

may damage Cintiq.

CAUTION Do not block the display panel or converter unit ventilation holes; this may overheat and

damage the units.

When not using Cintiq for long periods of time, unplug the power adapter from the AC outlet.

HANDLING

WARNING High Voltage. Do not open or disassemble the Cintiq pen display or converter unit.

There is a risk of electrical shock when the casings are open. This will also void your warranty and Wacom shall have no responsibility to repair or replace the product.

WARNING If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking

from it; this liquid is an irritant. In case of contact with skin, eyes, or mouth, rinse immediately with running water for at least 15 minutes or more. If contact is made with the eyes or mouth, also consult a physician.

WARNING

Hg

– LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.

The Cintiq pen display has a backlight which contains mercury (Hg).

Be sure to dispose of properly, and to manage any disposal of this unit in accordance with your local ordinances and laws.

WARNING Prevent children from swallowing the pen tip or side switch. The pen tip or side switch

may accidentally be pulled out if children are biting on them.

CAUTION Do not disassemble the Grip Pen. This may cause the device to malfunction. In this case, Wacom shall have no responsibility to repair or replace the product.

CAUTION Do not scratch the display screen. Avoid placing sharp objects on the display screen surface.

CAUTION Avoid intensive shock or vibration to Cintiq, the converter unit, or the Grip Pen.

Hitting or dropping Cintiq may damage the display screen or other components.

Precautions

Page 3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W Wacom Cintiq 12WX INTRODUCTION AND OVERVIEW PHYSICAL LOCATION PRECAUTIONSENVIRONMENT Temperature and HumidityThe Cintiq pen display has a backlight which contains mercury Hg USAGEHANDLING CAUTION Do not excessively bend or crimp the cabling Installation CONTENTSYour new Cintiq Working with your CintiqAppendix TroubleshootingYOUR NEW CINTIQ PACKAGE CONTENTSFRONT VIEW CINTIQ PEN DISPLAY COMPONENTSPower switch REAR VIEWRotation pivot Kensington security slotPower plug CONVERTER UNITUSB-A connector DVI-I video connectorThere are two primary steps to the installation process INSTALLATIONStep 1 display installation Step 2 pen tablet installation Follow ALL installation instructions carefullySTEP 1 DISPLAY INSTALLATION DISPLAY CABLING DIAGRAM Next, turn on your computer For Macintosh systems, a Cintiq color profile will be added to your computer’s color management system during the tablet software driver installation process. To activate this color profile for use with Cintiq, you may need to select the Cintiq 12WX profile in the system’s ColorSync Utility control panel. For more details, see the color management information in your operating system and application documentation PEN TABLET USB CABLING DIAGRAM STEP 2 PEN TABLET INSTALLATIONUSB CABLE INSTALLATION SOFTWARE INSTALLATION WORKING WITH YOUR CINTIQ USING THE GRIP PENBASIC PEN OPERATIONS Using the side switch The pen is equipped with a DuoSwitch. This switch has two programmable functions that can be selected by rocking the switch in either direction. You can use the DuoSwitch whenever the pen tip is within 5 mm 0.2 inch of the tablet surface you do not need to touch the pen tip to the tablet in order to use the switch. By default, the upper switch is set to DOUBLE CLICK and the lower switch is set to RIGHT CLICK TABLET CONTROLS Tips USING THE EXPRESSKEYSUSING THE TOUCH STRIPS SETTING UP YOUR WORK AREA ADJUSTING DISPLAY INCLINE ROTATING THE TABLET ATTACHING THE ACCESSORY FEETLEARNING MORE ABOUT CINTIQ CUSTOMIZINGOPENING THE CONTROL PANEL Software User’s Manual CUSTOMIZATION BASICSCloses the control panel CALIBRATING CINTIQ POWER SAVING ADJUSTING THE DISPLAYFACTORY PRESETS, AUTO-SYNC, AND COLOR CALIBRATION 1. MENU button ON SCREEN DISPLAY OSD SETTINGSENTER button 2. Selection buttonsThe basic process for working with the OSD is as follows Main Control ResetOSD Control LanguageHORIZONTAL. Changes the horizontal position of the image. To automatically adjust, use the AUTO ADJUST option ADJUSTING CLOCK AND PHASE VGA ONLY 1. If the Cintiq power LED does not light, check the following TROUBLESHOOTINGTESTING CINTIQ 3. Verify that the tablet and Grip Pen are working 2. If there is no displayTESTING THE TOUCH STRIPS TESTING CONTROLS AND INPUT TOOLSTESTING THE EXPRESSKEYS Airbrush TESTING A PENGENERAL DISPLAY PROBLEMS DISPLAY TROUBLESHOOTINGPage VGA PROBLEMS Testing Cintiq on page PEN TABLET TROUBLESHOOTINGGENERAL PROBLEMS FEEL The pen side switch does Delete the pen tablet preferences as follows See Technical support options on page WINDOWS-SPECIFIC PROBLEMSMACINTOSH-SPECIFIC PROBLEMS TECHNICAL SUPPORT OPTIONS USA, Canada, Central and South America OBTAINING DRIVER DOWNLOADSEurope, Middle East and Africa JapanCARING FOR CINTIQ CLEANINGAPPENDIX To insert a new nib REPLACING THE PEN TIPTo remove the old nib Removal from the fixture USING A MOUNTING FIXTUREAttaching to a fixture PEN AND DIGITAL INK CAPABILITIES IN WINDOWS VISTA ABOUT THE WINDOWS VISTA TABLET PC INPUT PANEL Macintosh UNINSTALLING CINTIQWindows DISPLAY PRODUCT SPECIFICATIONSCINTIQ 12WX MODEL DTZ-1200W GENERAL SPECIFICATIONS PEN TABLET POWER ADAPTERGRIP PEN MODEL ZP-501E 148 x 112 x 27 mm 5.83 x 4.41 x 1.06 in, excluding foot padsACCESSORIES ORDERING PARTS AND ACCESSORIES FEDERAL COMMUNICATIONS COMMISSION FCC NOTICE RADIO AND TELEVISION INTERFERENCEIndustry Canada, Class B INDUSTRY CANADA CANADA ONLYCE DECLARATION WORLDWIDE, EXCEPT FOR EUROPE, AFRICA AND MIDDLE EAST LIMITED WARRANTY WARRANTYIn North and South America contact WARRANTY SERVICE IN THE U.S.A. AND CANADAWARRANTY SERVICE OUTSIDE OF THE U.S.A. AND CANADA This page intentionally left blank Wacom Europe GmbH Wacom Technology CorporationWacom China Corporation TelephoneUE-0387 Installation Guide & Hardware Manual for Cintiq 12WX DTZ-1200W
Top Page Image Contents